How to register a new iPhone 5. How to register an Apple ID and what is it for? Preparation for registration

Buying devices from Apple is a joyful event. But after the first turn on the device, the user may encounter a number of problems. For example, with the activation of the gadget. Not everyone knows about this operation. We have to figure out how to activate the iPhone 5S. What does it take to bring an idea to life? If you carefully follow the simplest instructions, as well as read the text on the phone's display, you will be able to do this as soon as possible. Where to begin?

What is useful

Let's start with preparation. Activating the iPhone 5S is impossible without some details. Users usually have no problems preparing for activation. Particularly for Apple fans.

In general, this will require:

  • SIM card;
  • network connection via Wi-Fi (or a computer with the Internet and iTunes);
  • source of power;
  • phone charger;
  • clip for "sim card";
  • USB cable.

This will be enough to activate the "apple" device in any way. The iPhone 5S isn't that hard to get working. Next, we will consider the activation procedure in detail.

Activation steps

How to activate iphone 5s? More on this later.

First, you should pay attention to the fact that this process consists of several stages. Namely:

  • inclusion;
  • selection of basic phone settings;
  • direct activation;
  • starting the device for the first time.

We will definitely be able to learn about all these stages further. Everyone can easily get started with the iPhone 5S.

SIM card

The first thing to do is to insert a SIM card into the phone. "Apple" devices in this regard excelled. They provide a special process for connecting "sim cards".

How exactly to act? The owner of the "apple" phone must:

  1. Take a paperclip for the SIM card.
  2. Insert the mentioned component into a special hole on the side panel of the smartphone.
  3. Click on the pin.
  4. Take out the SIM card slot.
  5. Insert the SIM card into the slot.
  6. Return the component back to the phone.

Turning on the device

The next step is to turn on the smartphone. To do this, the user must first connect the device to the charger and plug the plug into an outlet. With zero (or minimum) battery power, activation will not be possible. She just breaks down. To successfully cope with the task, you need to have a charge of at least 20-30%.

How to activate iphone 5s? On the top panel of the "apple" phone, you must press the power button. After holding it pressed for a few seconds, the device will start.

If everything is done correctly, a silver apple will light up on the display. This is a sure sign that it's time to move on to the next step.

Basis

Did the person buy an Apple phone? The iPhone 5S, like any other "apple" device, will have to be activated. Otherwise, it will not be possible to work with him. Fortunately, everything is not as difficult as it seems at first glance.

The activation instructions for the iPhone 5S are divided into several simple steps. After turning on the device, you will have to set the basic phone settings. It is proposed to do this as follows:

  1. Swipe from left to right across the bottom of the display. You need to do this when the welcome screen lights up. It will say "Hello" in different languages.
  2. Select the desired system language. It is enough to tap on the corresponding line.
  3. Indicate the country of residence of the citizen.
  4. Establish an Internet connection. For example, by clicking on the "Select network" hyperlink, and then specifying one or another Wi-Fi.

By the way, the connection to the network must be taken very carefully. After all, the further activation of the iPhone 5S will depend a little on this. First, consider the situation with connecting to Wi-Fi. This is the most common layout.

Basic steps

How to activate iphone 5s with sim card? As soon as the user connects to the Internet, a form will be available for him to fill out. With its help, the phone will be configured for the first inclusion.

The iPhone activation guide looks like this:

  1. Enable or disable geolocation. To do this, click on the appropriate line.
  2. Select the "Like new" option.
  3. Create an AppleID profile.
  4. Click on the "I agree" button. It is located at the bottom right of the display.
  5. Click on the inscription "Install now" and put your finger on the selected area on the screen. This step can be postponed. Just click on the appropriate button.
  6. Set a password to work with the "apple" device.
  7. Click on the "Allow sending data to the Apple server" or "Do not allow" button. It all depends on personal preference.

Ready! If everything is done correctly, the message "Welcome!" will appear on the screen. It will inform you about the successful activation of the device. But what if there is no Wi-Fi network? Then you have to carry out the procedure through a computer.

iTunes, PC and iPhone

In reality, everything is much simpler than it might seem at first. We already know how to activate iPhone 5S. If the user cannot find the WI-Fi network, he will have to carry out the procedure using a computer or laptop.

Under such circumstances, everything starts with installing a program called iTunes. All owners of "apple" gadgets should have it. You will have to download the latest version of the program. Otherwise, the application may crash.

The iTunes installation file is downloaded from any available source, after which the exe document is launched on the computer. The installation wizard is activated. Following the instructions on the screen, a person will be able to complete the initialization of the software. It is absolutely free.

Connecting to a computer

How to activate iphone 5s without sim card? You can act through a computer and iTunes. This technique also helps to cope with the task if there is no Wi-Fi connection.

You need to correctly connect the "apple" device from "Apple" to the computer. How it's done?

The following type of instruction will help to cope with the task:

  1. Take a USB cable.
  2. Plug one end of the cable into the appropriate jack on your phone.
  3. Plug the other end of the cord into a USB port on your computer.
  4. Launch iTunes.
  5. Wait a bit.

Thus, not only the connection will occur, but also the synchronization of devices. It is very comfortable. Especially considering that now the user will be able to activate the iPhone 5S without much difficulty.

What exactly to do? Follow the instructions on the screen. They are no different from the previously listed steps. The only difference is that when connected via a PC, you can not insert a SIM into the device, and there is no need to turn on Wi-Fi.

Without iTunes

How to activate an iPhone 5S if a person does not have a SIM card? There may be problems with this operation. Especially if the user does not want to work with iTunes.

Without a SIM card, it is almost impossible to cope with the task. Although experts recommend working with iTunes to bring the idea to life. Or follow the instructions below.

It has approximately the following structure:

  1. Turn on phone.
  2. Press the Home button on your mobile device.
  3. Select "Emergency Call".
  4. Dial "112".
  5. Press the button to call the subscriber.
  6. Click on the "Turn off" button.
  7. Select the "Cancel" option.
  8. End call.

It is done! Now the user will have a fully working device. But, as a rule, sometimes the activation of the iPhone fails. What difficulties can be encountered under certain circumstances?

Problems

"Apple" smartphones are the most common technology. Quality, but even it sometimes fails. What difficulties can users face when thinking about how to activate an iPhone 5S?

We can distinguish the following situations and ways to solve them:

  1. If you do not remove the film from the mobile device, the Home button will not work well. Because of this, the device cannot be blocked. Everything is solved simply - you can press the "Enable" button on the gadget when auto-locking.
  2. There is no Wi-Fi connection. In this case, only connecting an "apple" mobile phone to a computer with iTunes will help to cope with the task.
  3. Device sync issues. Usually they disappear if you update iTunes on your computer.
  4. iTunes update error. Removing it is easy. It is enough to close the application completely first. Only then is it allowed to be updated.
  5. Unable to take fingerprints. To accomplish this task, you need to remove the factory protective film from the screen. With her, the mentioned operation will not work. The sensor simply will not be able to recognize prints.

These are the most common problems. Now it is clear how to deal with them. Activating your iPhone will no longer cause any trouble or hassle.

Results

We figured out how to get an "apple" phone to work for the first time. The instructions offered to your attention will help you activate any iPhone. The main thing is to properly prepare for the procedure.

At first, you can refuse to create an AppleID. Without this profile, the owner of the phone simply will not have the right to use Apple services. For example, iCloud or AppStore. Therefore, it is advisable to immediately start AppleID.

Often users ask how to activate the iPhone 5 and 5S, because the iPhone for the first time has many different necessary functions. What applications to install, how to set up services, how to password-protect them or register in them, how to run diagnostics after purchase, what settings can be allowed, whether it is necessary to provide access to an iPhone, how to set up an iPhone - many questions arise for a beginner.

In this article, we will tell you how to activate a purchased iPhone 5S, how to set up an iPhone 6, including how to activate an iPhone 4 and 4S, and for some cases, we will describe how to activate an iPhone 6. The purpose of this topic is to set up an iPhone and avoid installing unnecessary applications, perform the correct algorithm of actions and avoid errors after buying a new iPhone.

In order to properly launch a new iPhone for the first time, you need to prepare and follow some activation rules for the setup procedure in order to avoid unnecessary errors.

Before you turn on your iPhone for the first time, you need to determine if it has sufficient battery power. In particular, activation on the iPhone 3GS, iPhone 4S should occur with 20% charge, and activation of the iPhone 6 or iPhone 7 - with a charge of at least 30%. Also make sure you have high speed WI-FI the Internet or the iTunes program installed on a laptop or computer. Oh, and don't forget the SIM card or Nano-sim. Please note that if the iPhone is locked, then activation will not work without the SIM card of the locked iPhone.

If you see that the iPhone is completely discharged, then you can first recharge it by connecting it to a computer via a USB cable or in the usual way. If iTunes is not installed on your PC, then download it from the official website iTunes.apple.com, and if it is available, then update it to the latest version.

How to activate iPhone 4S and 5S from scratch

So, let's start the process of activating and setting up a new device, which consists of several stages: connection, initial settings, connection to a laptop and activation, as well as the first inclusion.

Connection

To How to turn on the new Athos? In order to turn on the iPhone, hold down the Power button on the top end panel of the smartphone for a couple of seconds until the “apple” logo appears.

Initial settings

A screen will open in front of you, where you will see greetings from Apple in many different languages, then swipe down from left to right to select your language, for example, Russian. Next, you need to select your country, for example, Russia.



Turn on Wi-Fi on your iPhone by first entering the connection password, or connect the device to a computer with iTunes and the Internet.

iPhone 4S Activation

In order for the iPhone to be activated correctly through a laptop or computer, you need to prepare a USB cable, with which we connect the two devices. On the iPhone display, “location services” will appear, which must be turned on or off. They will come in handy when connecting Google maps or GPS. What exactly to do and how to turn it on?

First, you will have to accept the license agreement, for which activate the Agree button at the bottom right. You can also activate your iPhone 6 with this service or deactivate the location service. You can activate and then disable it in unnecessary applications. The geolocation feature decently consumes the iPhone battery and reduces the battery life of the iPhone accordingly.

Activating iPhone 5 and 5S

Further, for owners of versions from iPhone 5S to iPhone 7, activating the "Install fingerprint" function becomes the same mandatory procedure, for which you need to activate the "Set Up Now" key and make your fingerprint scanner . In this case, your finger should press the multifunctional button “Home” about 10 or 20 times. After that, a picture with your fingerprint will appear on the iPhone display. Setting up Siri on an iPhone 5S or iPhone 7 is quite simple, just run this installed application on your iPhone and follow the steps.

Now you need to diagnose connections on the iPhone 7. To do this, you need to decide on allowing various services access rights to your iPhone 7 to send data to the Apple server. For example, data about program errors can be sent to the server. What to do? If you do not wish to send any data, then click the Don't Send button.

After successful setup, the iPhone 5 se will greet you: “Welcome to iPhone !" Thus, the initial activation of the iPhone is completed. Activation of iPhone 6S and iPhone 7 is performed in a similar way.

Set up an Apple ID

One of the important steps in the initial setup of an iPhone is setting up and registering an Apple ID, with which you can register in various mega-important applications, such as iCloud cloud storage.


You can use different methods to register your Apple ID. We will tell you how to register an ID for free using the App Store program . We launch this program and select any application that is free, for example, the social network that you usually use, and download the application to your iPhone. Next, the "Login" window will appear with the entries "With existing Apple ID" and "create an Apple ID". If you have a registered ID, then launch the activated one by clicking on the first button. If you have not previously registered an Apple ID, then click on the "create an Apple ID" item.



Then choose your country and agree to the terms of service, which are set out on 66 pages. Now the most important thing is to create an eight-digit or more password in which at least one letter must be capitalized, at least it was present 1 number, while it is forbidden to use several identical numbers or letters in a row, and the number should not just be guessed, and of course be unique.

When the system asks for payment information, click "No" and enter your address details, filling in all the lines, including choosing a greeting, a security question and your backup mailbox and the main activated mailbox, which will receive an activation email immediately after registration . Follow the link in the email to confirm your Apple ID activation.

What mistakes should not be made when activating the iPhone

One of the most common errors during activation - I bought it, but forgot to remove a special protective film that blocks the Home key, so I could not activate it correctly, the scanner from the finger was not considered due to the presence of a film on the button.

Another common and more serious mistake is that due to the lack of a WI-FI connection, I logged in through my computer for the first time, but I rushed and forgot to update iTunes, so the activation failed. And for some users, the iTunes update fails and an error message comes up, since this program was open during the update, and it needs to be closed.

Another far from minor mistake is the quick consent of the buyer of an iPhone so that the seller himself sets up your iPhone and creates an Apple ID for a small fee. Of course, he is always happy and it is clear why. But you are in vain falling into the euphoria of a relatively cheap service. What will you do later when the seller does not tell you the control words of the question during registration or completes the registration with some errors? This won't show up right away, but you'll run into this later when the ID isn't included. Therefore, activate the purchased iPhone only on your own, writing down all passwords and keywords for memorization.

Be sure to keep the receipt from the purchase and the box itself, which will definitely be needed in case of theft or loss of the iPhone.

Ever since the time iOS 5 activation process iPhone became extremely simple and understandable to any user of technology Apple but what if iPhone 5 your first device with a bitten apple on the end? Then you can’t do without our instructions for activating a new iPhone. If you have one of the previous iPhones running iOS 5 or higher, this guide will also help you take the first step towards using your new gadget.

After the iPhone 5 is unpacked, inserted into the application from your operator (or made by hand, according to ours), turn on the iPhone by long pressing the button on the top end and proceed directly to the activation process. All screenshots, unfortunately, are in English, but the process is similar for the Russian language, you won’t get lost.

1) First of all, we are offered to choose the country of residence and language. We choose accordingly Russia-Russian.

2) Next, we will be asked whether to enable geolocation services, they are necessary for the operation of many applications (geotags in photos, maps, navigator, and even Siri), but if you work as a spy, you can not activate them :) After iPhone 5, it will ask us to connect to wireless network (Wi-fi), Internet is required to complete the activation process and configure a number of Apple services. Accordingly, we connect if there is an active network nearby, if not, we choose to use the mobile Internet from your mobile operator.

3) Then comes the activation stage in the network of your operator, you may have to wait a bit until all the settings “arrive”. The next step is to restore from a backup, if your iPhone is not the first one. Restore options from iTunes and iCloud are available. If the iPhone 5 is your first phone from Apple, select "Set Up an New iPhone"

Note: All further steps are optional, in fact, you can already use the phone by simply skipping them, but we still strongly recommend that you complete the setup in order to experience the full power of the new iPhone 5, paired with the equally fresh and wonderful iOS 6.

4) At this step, we need to connect to a wireless network (Wi-fi) and log in with our Apple ID (a personal identifier in the Apple ecosystem, without which you will not be able to use the 10th part of all services), or register a new one (for free), in case of his absence.

5) Next, we need to accept the agreement on "rights and obligations", click "Agree", or "Accept" in the Russian version of the interface, and activate the voice assistant - Siri. In Russian, Siri still does not understand anything, so you decide whether to turn it on or not.

6) We got to the final! At this stage, we will be asked whether to send diagnostic data to Apple and will show the coveted “Start using iPhone” button. That's it, your iPhone 5 is ready for battle :)

Will be created when the gadget is activated. However, when setting up a smartphone for the first time, users often skip this step for one reason - device requires credit card details. Russian users, accustomed to suspecting fraud in everything, are delaying the creation Apple ID trying to find a way to do without a card.

There are several options for registering an iPhone account - among them there is one in which you do not need to enter credit card data.

Without Apple ID the user will not be able to:

About fully using iPhone without Apple ID there can be no talk. The legendary versatility of this smartphone is due to the huge amount of heterogeneous software available in the AppStore. iPhone no apps- just a stylish and high-quality assembled gadget, but by no means not multitool capable of handling any challenge.

How to create a new account through iTunes?

If you don't have iTunes, you should start by downloading the latest version of this program from the official website of Apple. Once you have downloaded and installed the media combiner, proceed as follows:

Step 1. open iTunes and click on the " Account» in the horizontal menu at the top.

Step 2. Select " To come in…".

Step 3. In the window that appears, click " Create a new Apple ID».

Step 4. You will be on the welcome page iTunes Store- here you need to click on the blue button " Proceed».

Step 5. At this point, you need to read the document titled " ' and check the box next to ' I got acquainted…”.

If you do not confirm the fact of familiarization, registration will not be completed.

In the absence of the ability to read the position of Apple immediately you should use the link "Print version". An HTML document will appear in the browser, which should be printed out so that you can familiarize yourself with it as soon as you have free time.

After confirming that you have read the terms, click " To accept».

Step 6. Fill out the form - you must enter the following data:

  • E-mail address. It is important that the address is valid and that you have access to it. Optionally, you can specify an additional postal address.
  • Date of Birth. By date, you must be over 21 years old - otherwise you will not be able to purchase content and software in the AppStore and iTunes Store.
  • Invented password. The password requirements for an Apple account are very strict: it must contain numbers, lowercase and uppercase letters. Plus, one character cannot be repeated three times in a row.

The user will also have to answer three questions - for example, What was the name of your childhood best friend? This measure is necessary to ensure the security of the account.

Step 7 Unsubscribe if you do not want to receive information about Apple products and movie and music releases in your inbox. To do this, uncheck the boxes next to " Recommendations and information…».

Then click " Proceed».

Step 8. Choose a payment method for purchases and enter the required details. note that Entering credit card details in iTunes is in no way a threat to your well-being. Money will be written off only in case of purchase of content or software and only with your consent.

If you chose a plastic card as a payment method, you will have to enter its number, expiration date, as well as CVC2 - the security code on the back. If you chose the option Mobile phone”, it is enough to indicate the cell number and confirm it via SMS.

Step 9. Fill in the fields of the block " Billing Address". You need to specify:

  • Last name and first name.
  • City code and name.
  • Street of residence and zip code.
  • Contact phone number.
  • Form of appeal (" mr" or " Ms.»).

Once you fill in the required fields, click " Create an Apple ID". You will see a window directing you to the mail.

Step 10. In the mailbox you will find the following letter:

You should click " Confirm address', after which you can assume that Apple ID successfully generated.

How to create an Apple ID without a PC?

You can also create an Apple account without a computer, but in this case, you need the device to be connected to 3G or Wi-Fi. Once you have access to the internet, do the following:

Step 1. AT " Settings» iPhone find section « iTunes Store App Store' and go into it.

Step 2. Click on the button " Create a new Apple ID».

Step 3. On the next screen, you will see a list of countries - Russia is selected by default. Without changing anything, click " Further».

Step 4. You should read the document titled " Apple Media Services Terms and Conditions". The document is quite capacious - on an iPhone it turns out 29 pages in small print; that is why most users neglect to read it.

Anyway, confirm that you have read " Regulations and agree to the terms, you will have to. To do this, click " To accept» in the lower right corner and then click on the button of the same name in the window that appears.

If you want to read the terms, but not from the phone screen, but from paper, use the "Send by e-mail" link. From email you can print the document.

Step 5. Fill in the form. You will have to enter the same data as when registering an account in iTunes– e-mail, password, date of birth, questions and answers necessary to ensure security.

If you don't want to subscribe to news about Apple services, apps, and content, toggle the sliders at the bottom to the inactive position.

Step 6. Choose a payment method and enter payment details. The same data is required as when registering through iTunes.

After entering the required information, click on " Further».

Step 7. Log in to the email you provided during registration Apple ID, and press " Confirm address».

Create an account Apple ID in the "Settings" of the device and registration through iTunes– similar procedures: in both cases, the same information is required.

You can also access the Apple account creation service through the App Store. Go to the app store and scroll to the bottom of the main page. Click on " To come in».

Then click " Create an Apple ID».

How to create an account on iPhone without a credit card?

At least one way to create Apple ID without a credit card. If you don't want to share payment details with Apple, please do the following:

Step 1. Go to iTunes and from the drop down menu select " Programs».

Step 2. Find free application (any) on the main page and click on its icon.

Step 3. After the description of the application opens, click " Download».

Step 4. In the window that appears, click on the button " Create a new Apple ID» - this is how you start the account creation procedure.

Continue registration in the usual way until the moment when you need to decide on the payment method.

Step 7. On the page " Specify payment method» instead of a bank card, select the option « Not».

With this choice, you will be relieved of the need to enter payment details. However, numerous fields of the block " Billing Address You still have to fill it out.

Conclusion

Create Apple ID You can do it with or without a PC. However, if you use a computer to perform this task and iTunes, less time will be spent - there will be plenty of typing, and it is more convenient to do it on the PC keyboard.

In addition, when registering from a computer, you can do without specifying the details of the selected payment method. This is important because many domestic users of Apple technology are suspicious of the requirement to leave card details.

Hello everyone! We have already met with the identifier in the apple company system (). And at the end of the article, we came to the conclusion that we need to register an Apple ID to create our own unique account. And if necessary, then we will do it! Moreover, if you follow these instructions exactly, the whole process will not take you much time, and your efforts will generally be minimal.

By the way, the article will consider registering an Apple ID without any card (credit card). Why without her? In fact, there are many reasons why. I won't go into too much depth and list just a few of them.

And here they are:

  1. The simplest - not everyone has this same credit card.
  2. Many are afraid to enter their card details (although it is completely safe).
  3. For some, free apps in the App Store are enough.

If all these three points are not relevant to you, then at a certain stage (at what? All the details - below), you will need to enter the "plastic" data.

In general, you can register an Apple ID absolutely at any time, both when you turn on the device for the first time and after it. The scheme is almost the same everywhere. Here we will consider the second option, namely creating an account on an iPhone or iPad, which we have been using for some time.

That is, we need:

  • Activated iPhone, iPod, iPad - here the instruction is universal, regardless of the gadget.
  • Wi-Fi connection or inserted SIM card (nothing will work without the Internet).

Everything is ready? Begin!

We take your device, unlock it and find the App Store icon in the menu, click.

Choose any free game or application - install. Attention! The free app is required.

Next, we need a menu item to create an Apple ID.

A window for creating a new account will appear. We see the choice of a country or region, we leave Russia.

"Terms and Conditions ..." - just accept. It’s hard for me to imagine a person who will read this - 60 pages after all :) Although, perhaps, my imagination is not rich enough :)

The data entry window opens.

A few important clarifications:

  • Be sure to enter a real email address.
  • The password must be made up of at least 8 characters: numbers, letters of the English alphabet, and at least one capital letter is required. Write down or remember the password!
  • Age - you must indicate that you are at least 18 years old. If you have not yet reached the age of majority - brazenly lie.

Very important! The given e-mail and password will be your Apple ID! Save, write down on a piece of paper, never show them to anyone.

Remember, this data is the only proof that the device belongs to you. To understand the seriousness of the situation, I advise you to read (especially pay attention to the last paragraph). All done? Move on…

Payment details - select no (if there is no intention to use a credit card). Or (if you want to use the App Store to the fullest), we indicate the payment system, after which we enter all the necessary information. The item "iTunes Gift Cards..." is optional. Fill in the rest of the information.

A letter was sent to the mailbox indicated above - open it, and of course follow the link to complete the process.

Congratulations, registration for Apple ID (and completely free of charge) is completed! And now you can use the App Store by installing free (well, or paid - paid) applications and games.

In my opinion, the instructions turned out to be quite detailed, but if you are tormented and haunted by various questions, then I always wait for them in the comments. Feel free to tell us about your problem - I will help, as they say, than I can :)

Updated! An article has appeared that summarizes all the errors that can interfere with the creation of an Apple ID. So if something doesn't work, .

P.S. By the way, for full and correct registration of Apple ID, you need to click on the buttons of social networks and like the article - try it, it really works!

2022 wisemotors.com. How it works. Iron. Mining. Cryptocurrency.