Closing the lid of a windows 7 laptop. How to make sure that the laptop does not turn off when the lid is closed? Why is it turning off

If you didn’t change anything in the power settings of an acer, Asus, hp and any other laptop, then when you close the lid, it will either turn off or go into hibernation.

Why does my laptop turn off when I close the lid? This is made for you. The fact is that most do not know that if the laptop does not turn off when it is closed, but works, then the screen can get very hot and fail.

When the lid is closed, the display is in very close contact with the keyboard, or rather the place where the processor is located, and it can heat up to 90 degrees.

Therefore, the manufacturer has provided protection - turning off the laptop when the lid is slammed. This procedure is not only in windows7 and windows 8, but also in vista and XP.

Setting the laptop lid when closed

To configure what happens when the lid is closed, go to and press "power".

I describe for windows 7, but in other versions it is almost identical. Then on the left side, click on the line: "action when closing the lid."

After that, you will move to another tab, where, as you can see in the figure, nothing actually needs to be explained.

Choose the most suitable option for you and click "save changes" at the bottom. Only if you select "no action required" - be very careful - screens are expensive.

It is best to put a dream. So you save all your work data and nothing will happen to the screen.

In general, you can change a lot in the power settings, including dimming the screen and turning it off completely when the laptop is idle.

All "default" settings are usually needed only for beginners so that they do not "go too far". More experienced users set everything up for themselves. Good luck.

When you close the lid, the laptop goes to sleep, but you want it to continue to function normally, performing current tasks? Read the tips below and you will learn how to close the laptop so that it does not turn off.

Why is this happening

The fact is that by default, operating systems have settings that specify certain actions for each event. When you close the lid, depending on the version of the OS, sleep or hibernation is activated.

What's the Difference

Very often, users confuse these two functions or even believe that they are one and the same. To finally understand the issue, it is worth making explanations that are relevant for Windows, starting with the version of Vista and higher.

Sleep mode is designed to save energy by reducing its consumption and allow you to quickly resume normal operation by pressing any key. If we draw analogies, then this mode is very similar to the pause function in a video player - the system stops all operations, but does not completely cut off the power supply and is ready to immediately return to normal mode at the request of the user.

Hibernation requires the least amount of energy, since when switching to this mode, the system saves open documents and data of all active programs on HDD and then turns off the power supply. At the first request of the user, the computer turns on again, and the OS loads the saved data into RAM, which allows you to pick up where you left off.

How to make a laptop work closed

It will take you a maximum of five minutes to solve the problem. The operation is very simple and does not require special knowledge and skills. Depending on the version of the OS that you have installed, go directly to the desired section.

Disable sleep/hibernation when closing the lid in Windows 10

1. Click "Start" and turn on "Settings".
2. Go to the first section, which is called "System".
3. In the left vertical menu, find the line "Power and sleep".
4. At the bottom right, under Related settings, click Advanced power settings.
5. In the new window that opens, find the line "Actions when closing the lid" in the vertical menu on the left and click on it.
6. Find the item "When the lid is closed" and set the value to "No action required". Don't forget to save your changes by clicking the appropriate button.

How to close the laptop so that it works - Windows 8

1. Go to Explorer, in the left column find the line "Computer" and click on it.
2. On the top panel there will be an icon "Control Panel", where you need to go.
3. In the window that opens, select the "Hardware and Sound" tab.
4. Go to the "Power Options" section.
5. In the menu on the left, click on the line "Actions when closing the lid."
6. In the line "When the lid is closed", set the value to "No action required".
7. Save your changes.

How to leave laptop on with lid closed - Windows 7

1. Go to "Start" and select "Control Panel".
2. Go to the "Power" section;
3. In the left part of the window, select "Actions when closing the lid";
4. Find the line "When the lid is closed" and set the value to "No action required".
5. Save your changes.

By default, when you install any version of the Windows operating system, it is configured so that when you close the lid, your laptop turns off or goes to sleep. On the one hand, for most laptop users, this is convenient - close the lid and the laptop "fell asleep" or turned off completely.

But what if you don't want to. For example, your laptop almost always has to be on for one reason or another. And so that it does not gather dust in your absence, it is logical to close its lid. But in order for it to remain working in the same mode and not go into a waiting mode, you need to change a couple of settings.

Customizing actions when closing the laptop lid

So, in order to configure the behavior of the laptop when the lid is closed in any version of Windows, be it Windows XP or Windows 10, you need to find the battery icon in the lower right corner of the screen in the notification area right next to the clock and click on it right click mice. Then select "Power Options" from the menu that opens.

Go to laptop power settings

A window will open in which you need to select "Action when closing the lid" in the upper left.

Setting the action when the laptop lid is closed

Here you have the option to customize what your laptop does when you close its lid.

For example, in order for the laptop to continue working with the lid closed when running on battery and on the mains, you need to set both columns (“On battery”, “On mains”) to “No action required”.

We disable the transition of the laptop to sleep when closing the lid in all cases

Or you can make the laptop go to sleep when running on battery while closing the lid to save battery power, and stay running when running on mains power.

Laptop going to sleep when closing lid only when running on battery

After you set these parameters as you need, do not forget to save the changes with the button at the bottom of the window.

Okay, back to the topic! In the settings, you can select only 4 actions that will occur when the laptop lid is closed. Let's take a quick look at each of them, without going into details, and then see where these settings are located in the operating room. Windows system 7.

• No action required. As you may have guessed, if you choose given parameter, then when the lid is closed, no action will occur. For example, you can turn on the music and close the laptop, the music will continue to play.

• Sleep mode. Low power mode that can be exited by moving the mouse or pressing any button on the keyboard. In this mode, the laptop consumes electricity, but very little. The current session is written to the RAM, and when you exit the "Hibernation" it is unloaded and you can continue working further.

• hibernation. If choose this mode, then when you close the lid of the laptop, the current session will be recorded on the hard drive, and the laptop itself will be completely turned off. When you turn on the laptop, the session will boot from hard drive and you can continue to work.

• Shutdown. The well-known mode can be found if you open the Start menu. If you select this mode in the laptop lid settings, then when you close the lid, the laptop will turn off. Probably invented specifically for the lazy. I closed the lid, the laptop turned off, and you don’t need to climb into the “Start”!

You can read more about each mode at windows.microsoft.com or visit the excellent wikipedia site. Now let's go to the control panel and see where these settings are located.

Adjusting the laptop when closing the lid.

Let's go to the menu Start "and open" Control Panel » for convenience, specify « small icons ” and select “ Power supply »

In the next window, in the menu to the right, select " Lid close action ».

Opens a window in which you can specify the actions you need when closing the lid.

• You can specify different actions depending on the situation. If the laptop is not connected Charger, then you can in the list " On battery " choose " Dream". Then, when you close the lid with no charging connected, the laptop will plunge into "Hibernation". The same is true for the situation where memory» connected. You can choose the action you want.

With such simple actions, actions are configured when the laptop lid is closed. With this I will end this great post, all the best and good luck!!!

What is the main advantage of a laptop over a desktop computer? Of course - in its compact size and mobility. However, as always, there is a “But” bottom ... It is inconvenient to carry it open, and when closing the laptop lid it turns off, which is not always required. How customize action when closing the lid - you will learn about this from this article.

The indicated question is relevant for those who often have to move around with the device turned on. For me personally, the problem became urgent on the day of purchase Acer Aspire V3 771G. It is quite large and heavy, and you have to move quite often from one room to another. It is somewhat counterintuitive to put the system into sleep or hibernation for 1-2 minutes each time. As a result, there was a need disable "sleep" laptop when closing the lid. AT this moment working operating system for me is Windows 7 Ultimate - its configuration will be discussed further. But the instructions will also come in handy for those who use newer releases of this OS - in Windows 8.1 everything is configured in a ~95% similar way.

How to make the laptop not turn off.

So, the necessary action is indicated through "" Windows. You can quickly get to this section of the control panel using the search in the Start menu by typing the word " power supply". In this case, among the search results, the item " Change the power plan". By selecting this item - you will see a dialog box that allows you to configure automatic dimming or turning off the display and putting the laptop into sleep mode during prolonged downtime of the device. Here you can also adjust the brightness of the screen both when powered by battery and from the network.

The action setting we need when closing the laptop lid is located a little “deeper” - in the dialog box available when clicking on the link “ Change advanced power settings". When moving to additional options the user is given the opportunity to fine-tune the power consumption of a laptop computer, including a separate item - “Power buttons and lid”. It is in it that there is a subsection - " Lid closing action”, in which the desired setting is hidden. In my case, you need to select the value " No action required” (i.e. the laptop will not react in any way to closing the lid). If necessary, you can select 3 other options: "Sleep", "Hibernate", "Shut down". The second option may not be, since it is possible to save disk space.

In conclusion, I will only note the fact that even when choosing "No action required" Screen turns off when lid is closed, but the system itself does not fall asleep. When you open your laptop, the monitor turns on automatically, and you can continue working without delay. I didn't try to find information on how to change this behavior, because it is quite logical - when closed, the screen is not visible (when running on batteries, it saves battery power). I think this is an “iron” function and without interfering with the hardware of the laptop, it will not be possible to change something (but it is not required either).

You can also go to the settings described above through the “Personalization” item. context menu desktop - "Screensaver" - "Change power settings". In my opinion, this way of opening the corresponding dialog box will be convenient only for those who type very slowly on the keyboard. Besides - item "Personalization" is missing in the "Initial" and "Home Basic" editions of Windows, namely, they are usually installed by the manufacturer on laptops. If you have suffered such a fate, and there is a desire to switch to a full-fledged Windows, then you will come in handy.