How to properly charge a new phone for the first time? New phone battery: how to charge correctly? How to charge a new battery on a smartphone

While the engine is running, the battery (), regardless of the type (maintained or maintenance-free battery), is recharged from the car generator. To control the battery charge, a device called a relay regulator is installed on the generator.

The very operation of a car in winter often involves short trips, turning on a large number of energy-intensive equipment (heated mirrors, windows, seats, etc.) The load on the battery increases significantly. At the same time, the battery simply does not have time to charge from the generator and compensate for the losses spent on launches. Taking into account the above, it is optimal to fully charge the battery with a charger to 100% at least once a year before the onset of cold weather.

Let us add that in case of problems with starting the engine due to engine malfunctions (problems with fuel equipment, etc.), the owner has to turn the starter much longer and more intensely. In such cases, you will need to charge the battery with an external charger much more often.

Charging the battery with a charger

To know how to charge a maintenance-free car battery with a charger, as well as charge a maintenance-free battery, you must follow certain rules. The charger (charger, external charger VZU, jump charger) is actually a capacitor charger.

A car battery is a source of constant current. When connecting the battery, it is imperative to observe the polarity. For this purpose, the connection locations for the positive and negative terminals are indicated by the positive and negative signs (“+” and “–”) on the battery. The terminals on the charger have similar markings, which allows you to correctly connect the battery to the charger. In other words, the “plus” of the battery is connected to the “+” terminal of the charger, the “minus” on the battery is connected to the “-” output of the charger.

Please note that accidentally reversing the polarity will cause the battery to discharge instead of charging. It is also necessary to take into account that a deep discharge (the battery is completely drained) can in some cases damage the battery, as a result of which it may not be possible to charge such a battery using a charger.

It is also necessary to take into account that before connecting to the charger, the battery must be removed from the car and thoroughly cleaned of possible contaminants. Acid stains can be easily removed with a damp cloth, which is moistened in a solution with soda. To prepare the solution, 15-20 grams of soda per 150-200 grams of water is enough. The presence of acid will be indicated by foaming of the specified solution when applied to the battery case.

As for serviceable batteries, the plugs on the “cans” for filling acid should be unscrewed. The fact is that during charging, gases are formed in the battery, which must be provided with a free exit. You should also check the electrolyte level. If the level drops below normal, distilled water is added.

What voltage to charge a car battery with?

Let's start with the fact that charging a battery involves supplying it with such a current that the battery does not have enough for a full charge. Based on this statement, you can answer the questions with what current to charge the car battery, as well as how long to charge the car battery with a charger.

If a battery with a capacity of 50 Amp-hours is 50% charged, then at the initial stage the charging current should be set to 25 A, after which this current should be dynamically reduced. By the time the battery is fully charged, the current supply should stop. This principle of operation underlies automatic chargers, with which a car battery is charged on average in 4-6 hours. The only disadvantage of such memory devices is their high cost.

It is also worth highlighting semi-automatic type chargers and solutions that require completely manual configuration. The latter are the most affordable and widely available on sale. Taking into account that the battery is usually 50% discharged, you can calculate how long to charge a maintenance-free car battery, and also understand how long it takes to charge a maintenance-free car battery.

The basis for calculating the battery charging time is the battery capacity. Knowing this parameter, the charging time is calculated quite simply. If the battery has a capacity of 50 Ah, then to fully charge it is necessary to apply a current of no more than 30 Ah to such a battery. The charger is set to 3A, which will require ten hours to fully charge the battery with the charger.

To be 100% sure that the battery is fully charged, after 10 hours you can set the charger current to 0.5 A, and then continue charging the battery for another 5-10 hours. This charging method does not pose a danger to car batteries, which have a large capacity. The downside is the need to charge the battery for about a day.

To save time and quickly charge the battery, you can set the charger to 8 A, and then charge it for about 3 hours. After this period, the charging current is reduced to 6 A and the battery is charged with this current for another 1 hour. As a result, it will take 4 hours to charge. Note that this charging mode is not optimal, since it is advisable to charge the battery with a small current of up to 3 A.

Charging with a high current can lead to overcharging and excessive heating of the battery, resulting in a significantly reduced battery life. We also note that the use of battery charging methods, which are aimed at minimizing the negative process of plate sulfation, in practice does not have noticeable positive results.

Proper operation of the battery depending on its type (maintained and unmaintained), avoidance of deep discharge and timely charging using a charger allow the acid battery to operate properly for 3-7 years.

How to assess the condition and charge of a car battery

Proper charging and a number of conditions that must be observed during operation of a car battery can ensure normal engine starting even in extremely low temperatures. The main indicator of the condition of the battery is the degree of its charge. Next we will answer how to find out if the car battery is charged.

Let's start with the fact that some battery models have a special color indicator on the battery itself, which indicates whether the battery is charged or discharged. It is worth noting that this indicator is a very approximate indicator, by which only the need for recharging can be determined with a certain degree of probability. In other words, the charge indicator may indicate that the battery is charged, but the starting current at low temperatures is not enough.

Another way to determine the battery charge level is to measure the voltage at the battery terminals. This method also allows a very rough assessment of the state and degree of charge. To measure, the battery will need to be removed from the car or disconnected from the charger, after which you need to wait an additional 7 hours. The outside air temperature is not of fundamental importance.

12.8 V - 100% charge;
12.6 V-75% charge;
12.2 V-50% charge;
12.0 V-25% charge;
A voltage drop of less than 11.8 V indicates a complete discharge of the battery.

You can also check the battery charge level without waiting. To do this, the voltage at the battery terminals must be measured by the load using so-called load forks. This method is more accurate and reliable. The specified plug is a voltmeter; a resistance is connected parallel to the voltmeter terminals. The resistance value is 0.018-0.020 Ohm for a battery with a capacity of 40-60 Ampere-hours.

The plug must be connected to the corresponding outputs on the battery, after which after 6-8 seconds. record the readings displayed by the voltmeter. Next, you can estimate the degree of charge of the battery by voltage using a load plug:

10.5 V - 100% charge;
9.9 V - 75% charge;
9.3 V - 50% charge;
8.7 V - 25% charge;
An indicator of less than 8.18 V means the battery is completely discharged;

You can also take measurements in the absence of a load plug without removing the battery from the car. The battery must be connected to the vehicle's on-board network. Then you will need to put a load on the battery by turning on the headlights and high beam headlights (for cars with standard halogen lamps). The headlight bulbs have a power of 50 W, the load is about 10 A. The voltage of a normally charged battery in this case should be about 11.2 V.

The next way to check the battery charge is to measure the voltage at the battery terminals at the moment when the internal combustion engine is started. These measurements can be considered reliable only if the starter is working normally.

At the time of start-up, the voltage reading should not be below 9.5 V. A voltage drop below this mark means that the battery is heavily discharged. In this case, it needs to be charged using a charger. This test method also allows you to identify starter problems. A known good and 100% charged battery is installed on the car, after which a measurement is made. If the voltage at the battery terminals drops below 9.5 V at the time of starting, then problems with the starter are obvious.

Finally, we add that measurements using different methods involve recording fluctuations in fractions of a volt. For this reason, increased demands are placed on the voltmeter. The accuracy of the device is extremely important, since the slightest error of even one or two percent will lead to an error in measuring the state of charge of the battery by 10 -20%. For measurements, it is recommended to use instruments with minimal error.

How to charge a completely dead car battery

A common cause of deep battery discharge is simple inattention. Often it is enough to leave the car with the lights or headlights, interior lighting or radio on for 6-12 hours, after which the battery is completely discharged. For this reason, many car owners are interested in the question of whether it is possible to restore a completely discharged battery.

As you know, completely discharging a battery greatly affects the battery life, especially when it comes to a maintenance-free battery. Manufacturers of car batteries indicate that even one full discharge is enough to cause the battery to fail. In practice, relatively new batteries can be restored at least 1 or 2 times after they are completely discharged without significant loss of performance properties.

First, you need to determine how much the battery is discharged using one of the above methods. You can also immediately charge the battery. Next, the completely discharged battery must be charged in the mode recommended by the battery manufacturer. The standard is to supply a charge current value at 0.1 of the total battery capacity.

A fully charged battery is charged with this current for at least 14-16 hours. For example, consider charging a battery with a capacity of 60 Amp-hours. In this case, the charge current should be on average from 3 A (slower) to 6 A (faster). A completely discharged car battery should be properly charged with the lowest current, and for as long as possible (about a day).

When the voltage at the battery terminals does not increase any more for 60 minutes. (assuming the same charging current is supplied), then the battery is fully charged. Maintenance-free batteries, when fully charged, assume a voltage value of 16.2±0.1 V. It should be borne in mind that this voltage value is standard, but it also depends on the battery capacity, charging current, electrolyte density in the battery, etc. Any voltmeter is suitable for measurement, regardless of the instrument’s error, since it is necessary to measure a constant, not an exact voltage.

How to charge a car battery if there is no charger

The easiest way to charge the battery is to start the car using the “lighting” method from another car, after which you need to drive the car for about 20-30 minutes. For charging efficiency from the generator, either dynamic driving in high gears or driving in low gears is assumed.

The main condition is to maintain crankshaft speed at around 2900-3200 rpm. At the specified speed, the generator will provide the necessary current, which will allow you to recharge the battery. Note that this method is only suitable if the battery is partially, not deeply, discharged. Also, after the trip you will still need to fully charge the battery.

Quite often, car enthusiasts are interested in what else can be used to charge a car battery, besides a charger. Most often, chargers that charge mobile phones, tablets, laptops and other gadgets are supposed to be used as a replacement. Let us immediately note that these solutions do not allow you to charge a car battery without a series of manipulations.

The fact is that the main condition for supplying current from the charger to the battery is that there must be a voltage at the output of the charger that will be greater than the voltage at the battery outputs. In other words, if the battery output voltage is 12 V, the charger output voltage should be 14 V. As for various devices, their battery voltage often does not exceed 7.0 V. Now imagine that you have a gadget charger at hand that has the required voltage of 12 Q. The problem will still be present since the resistance of the car battery is measured in whole Ohms.

It turns out that connecting charging from a mobile device to the battery outputs will actually constitute a short circuit of the terminals of the charging power supply. The protection will be triggered in the unit, as a result of which such a charger will not supply current to the battery. In the absence of protection, there is a high probability of failure of the power supply from a significant load.

It is worth adding that the car battery should also not be charged from various power supplies that have a suitable output voltage, but they are structurally unable to adjust the amount of current supplied. Only a special charger for a car battery is a device that has at its output the required voltage and current to charge the battery. In parallel with this, it is possible to control a constant current value.

Homemade charger for a car battery

Now let's move from theory to practice. Let's start with the fact that you can make a battery charger from a power supply from a third-party device with your own hands.

Please note that these actions pose a certain danger and are performed entirely at your own peril and risk. The administration of the resource does not bear any responsibility, the information is presented for informational purposes only!

There are several ways to make a charger. Let's take a quick look at the most common ones:

Making a charger from a source that has a voltage of about 13-14 V at its output, and is also capable of providing a current of more than 1 Ampere. A laptop power supply is suitable for this task.
Charging from a regular household electrical outlet of 220 Volts. To do this, you will need a semiconductor diode and an incandescent lamp, which are connected in series in a circuit.

It should be borne in mind that the use of such solutions means charging the battery using a current source. As a result, constant monitoring of the time and moment of the end of the battery charge is required. This control is carried out using regular voltage measurements at the battery terminals or counting the time for which the battery is charged.

Remember, overcharging the battery leads to an increase in the temperature inside the battery and the active release of hydrogen and oxygen. Boiling of the electrolyte in the battery “banks” causes the formation of an explosive mixture. If an electrical spark or other ignition source occurs, the battery may explode. Such an explosion can cause fires, burns and injuries!

Now let’s focus on the most common method of making a charger for a car battery yourself. We are talking about charging a laptop from the power supply. To complete the task, certain knowledge, skills and experience in the field of assembling simple electrical circuits are required. Otherwise, the best solution would be to contact a specialist, purchase a ready-made charger, or replace the battery with a new one.

The manufacturing scheme of the charger itself is quite simple. A ballast lamp is connected to the power supply, and the outputs of the homemade charger are connected to the battery outputs. A lamp with a small rating will be required as a “ballast”.

If you try to connect the power supply to the battery without using a ballast light bulb in the electrical circuit, then you can quickly damage both the power supply itself and the battery.

You should select the right lamp step by step, starting with the minimum ratings. To begin with, you can connect a low-power turn signal lamp, then a more powerful turn signal lamp, etc. Each lamp should be tested separately by connecting it in a circuit. If the light is on, then you can proceed to connecting an analogue with more power. This method will help not damage the power supply. Finally, let’s add that the battery charge from such a homemade device will be indicated by the burning of the ballast lamp. In other words, if the battery is charging, then the lamp will light, even if very dimly.

The new battery must be fully charged and operational, that is, it requires immediate installation on the car to begin further use. Before purchasing, it is necessary to check the battery according to a number of parameters:

hull integrity;
voltage measurement at the outputs;
checking electrolyte density;
date of manufacture of the battery;

At the initial stage, it is necessary to remove the protective film and inspect the case for cracks, drips and other defects. If the slightest deviation from the norm is detected, it is recommended to replace the battery.

Then the voltage is measured at the terminals of the new battery. You can measure voltage with a voltmeter, but the accuracy of the device does not matter. The voltage should not be below 12 Volts. A voltage reading of 10.8 Volts indicates that the battery is completely discharged. This indicator is unacceptable for a new battery.

The density of the electrolyte is measured using a special fork. Also, the density parameter indirectly indicates the battery charge level. The final stage of testing is determining the release date of the battery. Batteries that were produced 6 months ago. You should not purchase back or more from the day of the planned purchase. The fact is that a ready-to-use battery has a tendency to self-discharge. For this reason, for long-term storage the battery must be prepared in advance, but in this case the battery can no longer be considered a new finished product.

It turns out that the answer to the question of whether a new car battery needs to be charged will be negative. There is no need to charge a new battery. If the battery you plan to purchase is discharged, then it may simply be old, used, or have a manufacturing defect.

Rules for charging your phone, what are they?

When purchasing a new mobile phone, it is very important to remember how to properly charge your smartphone for the first time. The further functioning of the battery depends on this, namely the duration of its operation in autonomous mode.
Immediately after purchasing a smartphone, you need to completely discharge it by actively using applications. Then charge for 15-16 hours straight. How to properly charge a new smartphone? During the initial charging period, you should not use the phone so as not to drain the battery.

The above steps should be repeated two or three more times. That is, discharge to 0% and repeat the charging cycle for 15 hours (you can leave the phone charging overnight). Knowing how to properly charge a new smartphone for the first time can extend its battery life.
Many users have a lot of misconceptions. There are several popular myths that need to be debunked immediately.

Myth 1: Using a charger from another device can be harmful
The “native” charger from the smartphone is not always nearby, and the percentage of energy at this time is approaching critical. Any charger with a suitable plug can be used to restore the battery.

Conclusion: You can charge with any charger, as long as it is not a Chinese counterfeit.
Myth 2: You can't use your phone while it's charging
Some users charge their smartphone only at night so as not to use the phone while charging. However, when using the adapter that came with the smartphone, there will be no harm from the work. The device is powered by something else that may cause it to malfunction while charging, but these charger faults are quite rare.

Conclusion: You can safely use your phone while charging.
Myth 3: You can't charge your smartphone at night
When using conventional mobile phones, charging the battery for a long time could cause it to overheat. This rule does not apply to modern smartphones, because they are free of this flaw. If the battery reaches 100%, the phone automatically stops charging.

These and other myths confuse people about how to properly charge a smartphone.

Why does it discharge quickly?

Most users are concerned not only with how to charge a smartphone, but also with the reasons that affect the rapid discharge of the battery. What affects battery charge?

1. Different phone options can consume electricity in different ways. For example, a larger percentage of the charge goes to the Wi-Fi wireless communication channel. If there is no need to access the Internet, it is advisable to turn off the wireless connection so as not to drain the battery.
2. It is impossible to imagine the owner of a smartphone who does not have a single application installed. Regular automatic system updates drain your battery, so you can turn them on manually if you wish. Applications such as a flashlight, GPS navigator, and pedometer also cause the device to require more frequent charging. Communication in Viber, WhatsApp and other applications drains the battery less quickly, but also consumes enough energy.
3. Sound effects for notifications about calls and messages drain your battery considerably. If you don't have a charger nearby, you can temporarily turn off the sound to get a few extra percent of charge.
You can track the activity of processes that consume energy in almost any smartphone in the settings menu. Once you know which programs and functions consume the most energy, you can turn off applications in a timely manner and thereby optimize the operation of your mobile device.

Efficient smartphone charging

How to increase battery efficiency while replenishing energy? To properly charge your smartphone battery, you should follow several rules.

That the battery must be completely discharged so that it does not lose its maximum capacity. Allegedly, the device “remembers” how much energy you spend before the next connection to the power grid, and in the future it can no longer contain more than this amount. This phenomenon is called the “memory effect” and is typical for old nickel batteries, but not for new lithium-ion batteries.

Moreover, complete discharge harms modern batteries, significantly reducing their service life. Below you can see a table of the relationship between Depth of discharge and the number of Discharge cycles that the device can withstand.

batteryuniversity.com

It turns out that the more the battery is discharged, the fewer cycles it can last. Battery University, an organization that researches energy storage, recommends not allowing the charge level to drop below 30%.

2. And do not abuse full charges

Users often charge batteries to 100% to maximize device autonomy. Or, in the case of laptops, they do not unplug them from the sockets for a long time. There is nothing wrong with such exploitation as long as it does not become a habit. If the charge level reaches the maximum too often, it can accelerate battery wear.

Battery University members give the following comment on this matter: “Partial charging is better than full charging.” According to their observations, the device must be disconnected from the power supply until the battery is 80% full. If we recall the recommendation from the previous paragraph, we can formulate a simple rule:

To help your battery last longer, keep it charged between 30% and 80%.

3. But once every 1-3 months, completely discharge and then charge the battery to 100%

This advice contradicts the previous two. But now we will explain everything. Laptops and smartphones on Android and iOS show the remaining battery power in percentage or minutes and hours. After a large number of incomplete cycles, this counter may lose accuracy. But after calibration, the numbers on the screen again begin to correspond to the real state of affairs. If you calibrate your battery once every 1-3 months, it will not harm it.

4. Avoid overheating the device

High temperatures negatively affect battery life. In the table below you can see the relationship between an increase in temperature (Battery temperature) and a decrease in battery capacity (Permanent capacity loss).

lifehacker.com

That is why it is very important to ensure that they do not overheat.

5. Connect the device to the power supply correctly

It would seem that what could be simpler than putting the gadget on charge? But there are pitfalls here too.

For example, a damaged or counterfeit charger can damage the battery and the gadget as a whole. Not to mention the danger it poses to surrounding people. Therefore, always use only working and certified chargers from brands you trust.

Additionally, if you charge smartphones and other gadgets from your laptop via USB, this may put an unwanted strain on its battery. To avoid draining the battery in this way, make sure the laptop is plugged in and not in sleep mode.

6. Charge your gadget halfway if you plan not to use it for a long time

Let's say you're leaving home for a month or two and don't want to take all your gadgets with you. Then you need to properly prepare them for inactivity. Apple and other manufacturers recommend turning off devices in such cases, leaving about 50% charge in the battery.

How to properly charge a smartphone? How to properly operate the device so that the battery does not lose its capacity and does not have to be replaced every six months? There are many myths about the correct charging of a smartphone and which of them are justified and which are not even believable - read our article.

Phone battery and device

Each battery has a certain service life, which is measured in the number of complete charge-discharge cycles, and this number decreases due to erroneous operation, sometimes by several times. The battery has a chemical structure packaged in a shell of insulating material and plastic. The principle of its operation is based on a reduction-oxidation reaction, in which the thermal energy of chemical processes is converted into electrical energy.

The period of widespread use of nickel batteries has long passed; the vast majority of modern batteries in smartphones are based on technology Li-Ion. When you buy a new smartphone, a natural question arises - how to extend its service life? Indeed, in many cases, it is a battery malfunction that forces us to rush to the service center and worry about the reliability of the device. A new battery will probably cost a pretty penny, so let’s figure out how to make the old one last as long as possible.

What to avoid during use

How to extend battery life

To minimize the risks of unplanned expenses associated with going to a service center or buying a new battery, we suggest you remember a few simple tips that will help you know exactly when to replace the battery.

All these simple recommendations are valid not only for mobile devices, but for almost any device powered by lithium-ion batteries. To avoid unpleasant situations and prevent a quick battery replacement, use the simple tips given in our article