Low level repair. Repairing a hard drive with MHDD. HDD Regenerator: How to use the hard disk recovery program How the hdd regenerator program works

Among all possible ways data storage, despite their great variety, the hard disk does not lose its popularity today. Not everyone dares to upload important information to the cloud, no matter how tempting the terms of using the service may seem, external media are also not always suitable for certain tasks, many users prefer to store personal information on internal drives due to the reliability of devices. At the same time, the HDD is also prone to malfunctions, which in many cases provokes malfunctions. operating system installed on the disk, or no access to user data. Neither one nor the other options are acceptable, so the issue requires an immediate solution. In the event of a complete failure of the hard drive, everything is easier, it will need to be replaced, but most often users are faced with the problem of bad sectors, which are not readable. To diagnose and restore the hard drive, specialized software is used. One of the most successful software solutions is HDD Regenerator.

Setting up and working with the HDD Regenerator program.

The HDD Regenerator application is a simple and effective tool for recovering bad sectors and the surface of a magnetic hard disk. The software uses a special surface magnetization reversal algorithm, while the structure of the data recorded on the disk remains the same. The Winchester or Hard Disk Drive, being a mechanical device consisting of several round plates, an electric drive and an information read / write head, wears out over time. Disks made of magnetic material on which information is applied rotate at high speed during HDD operation, and the head moves over their surface, performing data processing. In the event that some sections have lost their properties, writing to them becomes impossible, and reading of previously recorded files is not carried out.

The HDD Regenerator program can detect damaged areas on the disk and repair. When identifying unrecoverable errors sectors, the task is to reassign the address of the failed memory cell (one of the reserved values is assigned). Thus, writing will not be carried out on bad sectors, which will slightly reduce the size of the hard disk, but also reduce the likelihood of errors. During a deep scan, the software detects and fixes problems with the surface, with the help of HDD Regenerator, a complete regeneration of the surface is performed using the magnetization reversal algorithm. You can also use the application to diagnose digital media (USB flash drives, memory cards, SSDs, etc.).

Main functions of the program

The software differs in that scanning is performed at the physical level, which ensures interaction with unrecognized, unformatted HDDs and all popular file systems. The media to be recovered retains all existing data. After installing the software, it is possible to create a bootable CD / DVD or flash drive, in order to use it if the operating system cannot be loaded. The developer improves the functionality of the product with each update, latest version HDD Regenerator 2018 offers comprehensive hard drive diagnostics and recovery. The main features of the program are:

Low-level access for diagnosing the physical surface of the HDD.
Detection and treatment of bad sectors, checking for errors and correcting them automatically.
Identification of physical damage to the surface of the HDD, elimination of detected problems, regeneration by the remagnetization method.
Possibility to pause the recovery process if necessary.
Real-time monitoring of the hard disk status, notification of changes.
The S.M.A.R.T function allows you to evaluate the current HDD status, operating time, etc.
HDD Information Display ( General characteristics, temperature, devices, degree of fragmentation, and other data).
Detailed statistics of performed procedures.
Create bootable media for use in situations where, due to problems with the HDD, it is impossible to boot the system. When starting from the drive, the program starts and operates in DOS mode.
Ability to work in a Windows environment, regardless of the OS version (starting with XP).

It is easy to use the program of any version, whether it is HDD Regenerator 2011, 2016-2017 or 2018. You can download the software in a shareware version, but activation is required to use all the features. In the presence of license key HDD Regenerator the user will have access to full functionality for an unlimited period. The HDD Regenerator program has a convenient and intuitive interface, not overloaded with numerous submenus and unnecessary elements, the Russian language is supported, the functionality is easy to learn, which allows even an inexperienced user to use the tool.

Installing HDD Regenerator

To take advantage of the software features by running it from a flash drive or in Windows environment, first you need to download the distribution kit and install HDD Regenerator on your computer. The key and crack are in the archive along with the installer. In general, the procedure is similar to installing any other software, so there are no difficulties with this. We perform the following actions:

Download the program and run the installer.
The installation wizard will prepare the application for installation, after which we start the procedure by pressing the “Next” button.
We agree to the terms by marking the desired item, and click "Next".
By default, the program will be installed to the Program Files folder located on system drive, if desired, the installation path can be changed by specifying a different directory. Click "Next" and wait for the procedure to complete.
If you check the box "Launch the program", the program will start when you click the "Finish" button. An application icon will also appear on the desktop.

You can run HDD Regenerator directly from the Windows environment or write to external drive to start from it.

How to use HDD Regenerator

Thanks to a clear interface, not burdened with a lot of settings, and a convenient navigation system, working with the program is easy even without a localizer. There are several options for launching the software: from a shortcut on the desktop, from a USB flash drive or an optical disc. Let's take a closer look at how to properly use the HDD Regenerator program. The interface offers several tabs, when you go to each of them, functions are available that allow you to check and restore the hard drive, as well as burn software to media.

The technology allows you to diagnose the HDD, which should be done before the recovery procedure. It is possible that the hard drive is fully functional and the cause of operating system errors or other software problems not at all in it. To do this, go to the S.M.A.R.T section, the program will analyze the state of the HDD and display information about the health of the hard drive. If you see a status other than “OK” in the status, you will need to perform the recovery procedure.

How to recover a hard drive

In the program window, you will see an offer to scan the hard drive, as well as create boot drives. When it comes to troubleshooting a hard drive, there are a few steps that need to be taken. First you need to close all active programs, except for HDD Regenerator, and end the processes. Recovery instructions:

Go to the “Regeneration” section and select “Start Process under Windows” from the list.
In the next window, you need to select the hard drive so that HDD Regenerator starts the recovery procedure, then click "Start Process".
A window will open with a user interface based on text input from the keyboard and text output of the results. To select the type of scanning and recovery of the disk from the list of available actions, press "2" on the keyboard (Normal scan) and the enter key.
Now press "1" (Scan and repair) and Enter to check and fix the found bad sectors.
In a new window, you need to select the starting sector by pressing "1" and the enter key, after which the scanning process for errors will be launched, the progress of which is displayed in the program window. If errors are found during the check, HDD Regenerator will correct them. The process will take some time. Upon completion of the procedure, the user is provided with reporting information on the work performed (the number of bad sectors, fixed and not subject to recovery).

How to burn a flash drive

The program also offers the possibility of creating bootable USB flash drive or disk. To carry out the procedure, we connect the USB flash drive to the USB connector on a computer or laptop and perform the following steps:

In the main window of the HDD Regenerator application, click the "Bootable USB Flash" button.
We select the USB flash drive that should be made bootable (if several USB devices are connected to the device, they will be displayed in a list) and click "OK".
A warning window will appear informing you that all information from the USB drive will be erased, we agree with this by confirming the action with the "OK" button.

At the end of the process, you will have a boot drive where you can copy the program to boot with the possibility of treatment outside the operating system of the computer.

The procedure is similar to the previous one, only to burn a disc, you need to insert a CD / DVD disc into the drive and press the “Bootable CD / DVD” button in the main application window. Next, the required disk is selected and by clicking "OK" the process starts. To use software tools from a bootable drive, whether it be a flash drive or a disk, you must specify in the BIOS the boot priority from removable media.

Advantages and disadvantages

The HDD Regenerator software solution provides the user with the opportunity to independently deal with problems with the HDD without resorting to the services of service specialists. Among the advantages of the software:

Intuitive, user-friendly interface and ease of use (even in English version).
Russian language support.
Working in OS Windows any versions since XP and file system independence.
The ability to work both in the Windows environment and outside it (using a boot drive).
Recovery of damaged sectors.
View statistics about recovered hard drive sectors.
Monitor HDD status in real time.
Creating a full-fledged boot device from an optical disc or USB flash drive.
The ability to pause the process of scanning the hard drive, so that later they will return to the procedure.
Security of the recovery procedure for user data.

The disadvantages include the following points:

The full version of the product is paid.
The absence of the Russian interface in the official release.

At the same time, you can also use free version, its functionality is quite enough for basic tasks, and for those who want to use the program with the Russian interface, it will not be difficult to use the crack.

As you can see, there is nothing complicated in working with HDD Regenerator; you don’t need to study the settings in depth. With the help of this software, you can restore the hard drive to working capacity without much effort in just a few clicks, as well as create a bootable drive, which helps a lot in case of force majeure.

Hard disk drive (HDD) personal computer is the most vulnerable device, since in its design it uses many mechanisms through which data is read. However, due to such advantages over integrated memory units as speed and the ability to format without losing HDD clusters, it is still used in PC architecture. With intensive long-term work, mechanical damage to the hard disk is often observed, which can lead to the loss of some information.

How to recover HDD?

The main reason for the incorrect operation of the HDD is "broken" sectors, the reading of which is not possible. Often, PC owners, when a hard drive fails, try to “reanimate” them on their own, which can lead to even more unfortunate consequences, and specialized information recovery services require a rather high payment for their services.

It should be noted that in some cases we are not talking about restoring the working capacity of the HDD at all, because only the information that is contained on the hard disk is important. For these reasons, the only true method to implement access to lost data is specialized software.

In this article, we will consider the HDD Regenerator program, which is often used for professional purposes by many services. The main difference between HDD Regenerator and many similar programs is a low-level algorithm that allows, through integration into the DOS environment, access not only to the HDD itself, but also to control and restore sectors and disk memory cells, as well as participate in monitoring and control of hard drive mechanisms using hardware methods.

For these reasons, HDD Regenerator really restores "broken" sectors, preserving the information that was stored in them, and does not demagnetize and remove them from the general array. Initially, we need to download and install HDD Regenerator on a PC. In order to describe in more detail the process of the hard disk recovery program, we will consider the functionality of the software through the Windows interface.

So, after installing and running HDD Regenerator, a dialog box appears in front of us.

Operation of HDD Regenerator directly in OC Windows.

To check and restore the HDD in the system shell, click on top line indicated in the photo. You will see a window for selecting hard disk partitions that need to be restored.

Sometimes there is a warning that your HDD controller SATA works in mode ANCI. To fix this error, you need to reboot through the BIOS and set SATA as the working mode IDE.

Remember! When using this program, you must disable all applications that access the hard disk during operation (antivirus software, search indexing, etc.).

It often happens that this is not possible, which is clearly demonstrated by the dialog box that constantly appears during the verification process.

In order to avoid such messages, press the button " Cancel« , as a result of which the Command Line console appears in front of us, where four points are indicated.

1. Diagnostics and scanning of "broken" sectors and partitions.

2. Full HDD scan with/without data recovery.

3. Software version.

4. Information about the results of the HDD Regenerator.

Pressing the key as an example 2 and Input and watch the progress hard checks disk.

It should be noted that HDD recovery by this method does not allow for complex hard disk, therefore it is very inefficient in some cases. How to restore the computer hard drive?

HDD recovery via bootable flash drive

To do this, you need a flash memory of at least 1 GB. When you start HDD Regenerator, click on the item " Create a bootable flash drive“and wait until the data on it is formatted and the boot data is placed. After that, the program will prompt you to restart the PC, which we do.

In the process of rebooting the PC, you need to go into the BIOS and set the priority for loading OC Windows through the bootable flash card!

After that, a DOS window will appear in front of us, in which we will be asked to select partitions for analysis and recovery.

Select the required directory and click Input. All. The process has started and now we can only wait for the results.

Remember that you can stop the scanning process with the Esc key, however, in this case, no one guarantees correct results, so you should wait for the full recovery process to complete.

In case of significant damage to the HDD, the program will “freeze” while processing a particular sector, and the duration of the program may be several hours. In this case, there is nothing left to buy new HDD and rewrite to it that part of the information that was recovered by means of HDD Regenerator.

Unfortunately, nothing lasts forever, including hard disks computers. Over time, they can be subjected to such a negative phenomenon as demagnetization, which contributes to the appearance of bad sectors, and hence the loss of performance. If there are such problems, restore HDD computer in 60% of cases, according to the developers, the HDD Regenerator utility will help. In addition, it is able to create bootable flash drives, and perform some other actions. detailed instructions for working with HDD Regenerator will be provided by us below.

Consider the algorithms for performing the main tasks that can be implemented using HDD Regenerator.

S.M.A.R.T. testing

Before you start restoring a hard drive, you need to make sure that the malfunction lies in it, and not in some other element of the system. For these purposes, it is best to use S.M.A.R.T. technology, which is one of the most reliable self-diagnosis systems. hard drive. The HDD Regenerator utility allows you to use this tool.

Hard drive recovery

Now let's look at the procedure for repairing a damaged computer hard drive.

Create a bootable flash drive

Among other things, the HDD Regenerator application can create a bootable USB flash drive or disk, with which you can, for example, install Windows on your computer.

Create a boot disk

Similarly, it is created boot disk.

As we can see, despite the presence of a number of additional features, HDD Regenerator is quite easy to use. Its interface is so intuitive that even the absence of the Russian language is not a big inconvenience.

The hard drive, also known as the HDD, is the most valuable place on the computer, because. it is on it that all important information. The hard drive, unfortunately, is a rather fragile thing, so problems with it can occur, and quite often. If it so happened that the hard drive is damaged, you should not panic, because it can be restored using the HDD Regenerator program, which I want to tell you about today.

HDD Regenerator - a fairly well-known program that specializes specifically in restoring bad sectors of a hard drive. The program is successfully used not only ordinary users PC, but also service centers.

The main difference between HDD Regenerator and other similar programs is that it remagnetizes the broken sector, restoring it, and not hiding it, as other programs do.

Beginning of work.
You can try HDD Regenerator by downloading trial version programs at the link at the end of the article.

Once the file is downloaded, install and run the program.

Before starting work, be sure to close all programs that access the hard disk during work ( antivirus programs, search indexing, etc.).

To begin with, the program must conduct a scanning process to assess the condition of the hard drive. Select the button indicated by the arrow in the screenshot below in the upper window.

A new window will open with a list of discs that can be scanned. Select the one you need and click the "Start process" button.

If you have not closed any background programs, HDD Regenerator will display a warning. To continue scanning, you will have to close the remaining programs that interfere with the program.

Next, a window will appear in front of you command line, where 4 actions are available to choose from:

1. Scanning with recovery of bad sectors;

2. Normal scanning without bad sector recovery;

3. Recovery of sectors of a certain area of the hard disk;

4. Show statistics after the end of the recovery process.

To scan with the recovery process, select the first item. In my case, I will choose the second item to scan without recovery. To select an item, you need to go to it using the arrows on the keyboard and select it with the Enter key.

Next, you need to specify which segment of the hard disk will serve as the start of the scan. After that, the program will start.

After the HDD Regenerator is finished, the program will display the results, among which you will see the number of recovered sectors, segments that cannot be recovered (this may be) and other valuable information.

Thus, the program, by virtue of its capabilities, does an excellent job with its task, and it can be safely recommended to users for high-quality hard drive recovery.

The hard drive is not an eternal component computer system. Unfortunately, sooner or later it fails. The reason for this is demagnetization, as a result of which bad sectors appear. But what to do to extend, or even completely restore the performance of the hard drive? According to many experts, this will help one simple program, that's what we're talking about today. To be more precise, the article will tell you how to use HDD Regenerator 1.71, but it’s worth clarifying right away that the guide is suitable for other versions of the application.

Testing

Disk Recovery

A guide on how to use HDD Regenerator 2011, we will continue directly with main feature programs - the ability to restore broken hard disk. In fact, this procedure is quite time-consuming, so be patient and don't miss anything.

Launch the application.

On the top panel, click on the Regeneration section, which translates as "Recovery".

In the section menu that appears, select the Start Process under Windows option.

Immediately after that, a window will appear in which a list of installed on the computer will be displayed. hard drives. All you need to do at this stage is to select the desired hard drive and click the Start Process button.

A pseudo-graphical interface window will appear. For some users, working in it is not very comfortable, however, following the instructions, you should not have any problems with this.

To start the recovery process, enter the number "2" from the keyboard and press the Enter key.

In the next menu, you must press the key with the number "1", and then Enter. Thus, you will start the process of scanning bad sectors with their subsequent recovery.

Now you need to specify from which sector you want to check. It is best to check the entire disk, respectively, start from zero. To do this, enter the number "1" in the window and press Enter.

As soon as you complete all the above steps, an indicator of the progress of the restoration work will appear on the screen. It is with its help that you can track how many bad sectors were detected and how many of them were recovered. All that remains to be done is to wait for the scan to complete.

Create a bootable flash drive

From the guide on how to use HDD Regenerator, you already know how to recover bad sectors. This is the main function of the program, however, not the last one. With it, you can create a bootable USB flash drive in order to drop some program on it in the future to run it directly from the drive.

Open the program window.

Insert a USB flash drive into a port on your computer.

From the main menu of the application, click on the Bootable USB Flash button.

A new menu will open that will display a list of detected flash drives connected to the computer. Select your flash drive from the list and click OK.

A new window will appear, which will say that as a result of the operation, all data from the drive will be erased. Click OK to start the operation.

It doesn't last very long. Immediately after the end, the program will notify you of this, after which you can copy the program to the USB flash drive to run it from the BIOS.

Create a boot disk

The instruction on how to use HDD Regenerator would not be complete if it did not tell you how to create a boot disk. In general, this operation is not much different from the previous one, but for the sake of completeness, we will describe it in detail:

Run the program.

Insert a CD or DVD into your computer drive.

Click Bootable CD/DVD in the main menu.

In the list of detected optical drives, select the drive you just inserted and click OK.

Wait until the end of the process.

Now you fully know how to use HDD Regenerator. Of course, there are a few more items in the application that have not been discussed, however, they play a mediocre role.

Conclusion

So we figured out how to use the HDD Regenerator program. As you can see, despite the fact that the developers position it as an application for restoring the health of the hard drive, it has other equally useful features. You can easily use it to create a boot disk, USB flash drive or test the drive. In general, the program is very useful and it is recommended to install it on the computer immediately so that at any time there is an opportunity to influence the operation of the computer.