Software update for Samsung TV. Updating software for Samsung TV - how to do it? Update via USB

Today, Samsung Smart TV is considered the full-fledged leader in the smart TV market. These devices are characterized high quality, a wide range standard programs, intuitive interface, convenient browser and good technical equipment.

Despite the general concept of all Samsung smart TVs, models of different generations have their own characteristics when using certain functions. In this regard, in order to quickly set up a specific device and gain access to all its capabilities, you should follow the instructions. In general, to commission a TV, the user must take three steps:

  1. To plug smart tv Samsung to the Internet and make the necessary settings;
  2. Select and install applications according to your taste and needs;
  3. Install the necessary widgets.

Samsung Smart TV technology: how to watch movies over the Internet?

Samsung Smart TV technology provides own browser on televisions, however, difficulties may sometimes arise during its operation. For example, while watching a movie, an error message may appear at 10-15 minutes. By the way, this problem is quite common, but the usual setup of a Samsung smart TV will not help. But you shouldn’t panic, thinking that you’ve got a faulty device. The solution to this problem is to install additional programs.

We offer a list of the most effective applications available in Samsung Apps, to watch movies via the Internet on your TV:

  • TVZavr provides huge selection movies and supports the mouse (in other applications, navigation is carried out using the remote control, which is less convenient);
  • Megogo, Zoomby, OLL.tv and Tvigle services offer approximately the same amount of content;
  • YouTube and the like are convenient tools for working with video hosting sites. Here you can find almost any video material.
  • Vimeo is a service worth considering. Available on Samsung Apps.

  1. We go to the official website of the company. We use the “Downloads” section. We indicate the necessary data in the “Category” section.
  2. Next, we note the type to which the TV used belongs. Choose a model. Click on the “Downloads” item.
  3. Go to the “Firmware” section and download the new firmware version for the device you are using.
  4. We use a USB drive. We carry out the procedure of formatting it in FAT32.
  5. Launch the downloaded self-extracting archive. Specify the path to extract data.
  6. We transfer all the contents of the package to a USB drive (use its root directory).
  7. We remove the media. After turning on the TV, insert the drive into its USB port. Disable external devices: HDMI connectors and antenna cable.
  8. After determining the program, a special window will appear on the TV screen. Click “Yes” there.
  9. If the detection does not happen automatically, the control panel will help. We use its menu item “Firmware Update”.
  10. We enter the port in which the drive is installed and wait until the scanning process is completed.

  • The presence of a proprietary “smart” platform that turns the device into a multimedia center;
  • Internet connection via Wi-Fi or network cable;
  • Working with applications;
  • Communication via social media and other services;
  • Availability Smart functions Hub;
  • Search All – search the Internet for thematic content;
  • Samsung 3D – converting an image from two-dimensional to three-dimensional;
  • Social TV – “live” discussion of films watched;
  • Samsung Apps – branded store;
  • Depth Rendering – creating a surround sound effect.

So we figured out what Samsung Smart TV is, how to use this technology and what its main capabilities are.

TV software developers often delight users with the opportunity, or rather, the need, to update their Smart TV. If this is not done, the device will begin to behave inappropriately, cause system failures, and access to the Internet will deteriorate. In general, all the advantages that distinguished Samsung Smart TV from a device without any additional functionality will practically disappear.

From all this, only one conclusion can be drawn - Smart needs to be updated. But many regular users They don’t quite understand how exactly this is done. All that is required is a little free time, a USB flash drive that will work on a Samsung TV, or access to the Internet from the TV to download programs directly to the device, without the help of additional accessories. But in any case, updates are good, because they allow you to correct errors that were made in previous versions, thereby making the device more reliable.

Standby update function

Every advanced user knows that you can update software for your Samsung TV automatically using certain functions. It is difficult to say what comes of this. The good news is that the owner does not have to wonder when the TV firmware will be updated, because everything happens automatically.

But this function also has many disadvantages, which is why professionals do not recommend using it often. For example, this applies to setting incorrect parameters in the temporary search for updates on Samsung TV servers or on the official website. If these are not found, you can use a manual search, which is much more convenient, since it is used only when there is a real need for it.

So, what are the features of this function for Samsung Smart TV:

    Due to the fact that the user is not able to control every step of installing updates, they may not be installed correctly, resulting in various problems, malfunctioning of sites and other troubles. To correct such consequences, it sometimes comes down to replacing the motherboard;

    Since the update software occurs periodically, the TV may find a program in the middle of the night or early in the morning. Naturally, a TV that turns on spontaneously will do little to please the household;

    On Samsung TV There is not always a stable Internet connection, so if an update starts, or the file, for example, turns out to be too large, the Samsung TV will not be able to download it and will freeze. This is not the most pleasant situation, since there is a high probability that the device will need to be repaired;

    The TV may lose connection to Wi-Fi during the update, or the TV may have a timer that will turn off the device at a certain hour. If this happens, even if the firmware is almost installed, then most likely it will not turn on.

If the TV does not turn on after the update, it means that the installation of the program was unsuccessful. It is not recommended to persistently try to do something on your own, as the situation can only worsen.

Firmware update via USB

The most latest versions Firmware first appears on Samsung servers, and only after that it is posted on the website. Precisely because, in order to stay up to date with events, before you update the software, take it from the site, look at the servers - perhaps the firmware that is available is completely outdated.

You can even log in from your phone, the main thing is to have good internet. But it’s better to download to a computer where you can connect a flash drive, which will connect to the TV via USB. So, searching for firmware is very simple:

    To do this, you need to go to the website and enter the name of the model in the special search bar indicated at the top of the page. These symbols are usually indicated on the back of the TV;

    Next, a special page with instructions will open and current version software. To find out it, you should click on the line “Built-in software”, and you will immediately see technical description models, including what software is on the TV;

    You need to find and download the new software, but select USB type downloads. In addition, it is important to make sure that the software version is really new, and not download and install old or the same firmware;

    It is important to pay attention to the presence of the Russian language in the new software, because not everyone will be comfortable working in English or in a multilingual version;

    The file must be uploaded to a blank USB drive, which must be formatted before the material can be transferred to it. If you format it afterwards, all the information on the flash drive will be destroyed, and when you turn on the TV, it will not find the materials to begin the update process.

    When unpacking is finished, you need to move the flash drive from the computer to the TV and start the update. This is done like this: “Menu”, “Support”, “Software Update”, item “USB Software”, “Ok” or “Update Now”.

All devices running on it require periodic software updates. This applies to computers, laptops, phones and now TVs. This is required so that the device continues to function normally, there are no malfunctions and access to the Internet is stable. Updating the firmware is mandatory because new version are eliminated existing problems. However, not all users know how to update Samsung and are afraid to change anything. But in fact there is nothing to be afraid of, because new firmware fits onto the device easily. Let's take a closer look at how to properly update the software.

How to understand that you need to update the firmware

A software update for Samsung is required if:

  • Samsung Smart TV has stopped working stably, periodically crashes, programs do not turn on or the broadcast is turned off;
  • the speed of the TV's response to commands has become slower;
  • Applications don't work.

There may be several firmware versions, and in order to download the necessary one, carefully read the descriptions for them. It indicates what problems have been fixed and what useful things the developers have added to the new version.

What you need to update your TV

So as not to suffer from incorrect operation Samsung TV, you will need to reflash the software. There are several ways to do this:

  1. Via a flash drive.
  2. Through the Internet.

Experts recommend downloading the update to a flash drive, and then installing it on the TV from it. This method is considered the safest. During an update over the Internet, the connection may be interrupted, and then the download will be interrupted at best, or installed incorrectly at worst, and then you will not be able to do anything with your TV device at all. Before you begin, make sure your Smart TV needs to be updated. Also make sure that the software is compatible with the TV model, because otherwise it may not install correctly or not be installed at all.

How can I find out the correct firmware version?

A special feature of the programs is that they are designed for certain TV models. Manufacturers did this due to the fact that each TV panel is different from each other technical characteristics and opportunities. Therefore, when going to the manufacturer’s official website to look for the necessary firmware, be sure to indicate your TV model in the search. If you do not know the exact name of the model, then look in the documents that came with the kit, or at the sticker on the back wall of the case.

In addition, it is advisable to know the software version installed in this moment on the device. This is necessary for comparison with the version available on the site. To find this data you will need:

  • Go to the “Menu”, enter the “Support” and “Software Update” items.
  • Compare the software version on the TV panel and the one offered on the website.
  • If the version on the site is higher, then you need to download it; if it is lower or the same, then an update is not required.

Steps to install software on a Samsung TV

If, after all the manipulations and verifications, it turns out that it is necessary to install new software, then before starting, read the information attached to the file. Perhaps it indicates the installation method or something else useful. If all the data is suitable, then you need to transfer the file to your computer, and then transfer it to a flash drive. At the same time, experts recommend taking an empty flash drive, pre-formatted, for these purposes.

Only Smart TV can be updated via the network; if this function is not available on the TV, then only via a USB flash drive.

Follow these steps to install new software:

  1. If the file that was downloaded is archived, then it must be unzipped. To do this, double-click on it with the mouse cursor and start unpacking by clicking on “Extract”.
  2. After that, copy the data onto a flash drive and insert it into the USB port on the TV device.
  3. Start the installation by going to “Support”, then “Software Update”, then select “via USB” and check “Yes”.
  4. Wait for the installation to complete.

The second option is to update via the Internet. You need to do the following:

  1. Enter the “Menu” and select “Support”, then “Software Update”.
  2. If the last menu item is not available, then restart the TV, i.e. turn it off and turn it on after 3 minutes. If the item is still unavailable, check your Internet connection.
  3. Select "Update now". Smart TV will independently check for an available update, and if there is one, it will offer to install it. Answer “Yes.”
  4. Wait for the firmware update. After the installation is successfully completed, the TV will reboot on its own.

What to do if the firmware crashes?

There are times when the software on a TV does not work well, and over time it completely breaks down or, as they say, “crashes.” It is necessary to change the software even when the TV panel frequently freezes or refuses to respond to the selection of applications. In this case, it will be difficult to do anything using the existing software and update it over the network. It's better to use a flash drive and install the software from there.

Signs of incorrect firmware operation:

  • Samsung TV freezes on the start picture;
  • no backlight;
  • no image;
  • the image is displayed in thermal imager mode;
  • Symbols in the menu are distorted;
  • The image is shifted to the side or only half of the screen is displayed.

You can update the firmware on a Samsung TV via the Internet only for those models that have the Smart TV function. Otherwise, you will have to use a flash drive and perform the following steps:

  • format the flash drive;
  • download the software to your computer and, if necessary, unzip it;
  • save the software to a flash drive and insert it into the TV;
  • start the update and wait for it to finish.

Problems and their solutions

Sometimes a situation arises when it is not possible to install a firmware update on Samsung. It is possible that after launch, the process of installing new software did not begin or stopped after some time. Premature termination may occur due to interruption of communication with the router, so experts strongly recommend installing new firmware via a USB flash drive.

To restart the software correction process, follow these steps:

  1. Start the process again.
  2. Perform the update via USB.
  3. If you did it before the USB interruption and it didn’t work, take another flash drive.

If the TV device is not on Android, then you need to:

  • Press the Home button.
  • Select “Installation”, then “Software Update” and “Via the Internet”.

If the above methods did not help update the software on the TV, call a technician.

Everything is so arranged that nothing remains unchanged in our lives. Even when buying the most modern household appliances, rest assured that after some time it will lose its relevance and will be replaced by an even more perfect thing. To extend technical excellence, manufacturers release software updates. In other words, firmware. A newer version of the software (software for short) may fix some bugs or add new functions.

But not every user is familiar with the possibility of updating software and the procedure for replacing it. Let's look at a software update for a Samsung TV using a specific example. TV firmware update can be done in several ways. Today we will look at updating software via USB port.

TV software update


ATTENTION! IMPORTANT!

While updating your TV's software, you must not:

  1. Don't move USB flash drive in the TV connector
  2. Do not unplug the TV's power cord from the outlet.
  3. Don't turn off the TV

class="eliadunit">

The rapid development of technology leaves no chance even new purchase be like this for a long time. Continuous improvement in this area is increasing exponentially. Even what you buy today may become obsolete tomorrow. For some, it may be a revelation that technical excellence can be extended. It is enough to use the manufacturer’s service to install updated software. This is often called "firmware". In fact, the new version simply removed shortcomings, errors, or added new features to the previous software.

The procedure for updating the firmware of a Samsung TV is quite simple. Let's try with an example to take all the necessary steps for this. There are several methods, but we will use the update option via a USB port. You will need for the process: a clean USB drive, a laptop or PC with Internet access, and the TV itself, which we will update.

Step 1. First of all, we find out the version of the software already installed on our SMARTTV. To do this, we turn on the TV. We execute the commands: menu – support – software update . The alphanumeric combination on the right side will indicate the installed software version.

Step 2. We find in World Wide Web website and select the TVS product category from the list.

We enter the approximate numbers of your TV model and tips for matching models are displayed in the search bar. Select your TV model from the list or enter the full name of the TV model for an accurate search.

The exact model of your TV may be indicated on a small sticker tag on the back of the TV.

Step 3. We make sure that the information found really corresponds to the desired brand and model of TV. Then press the blue button DOWNLOADS AND DOCUMENTATION which became active after selecting the found model and we get to the “DOWNLOADS” page.

Step 4. In the “firmware” section we find a table with software updates developed to date for your equipment model. We compare the number with the numbers that we found as the first step in the TV menu. Does the site offer a higher number than the established option? This means it’s really time to go through the update procedure.

Step 5. Before downloading, we make sure that the software is suitable and completely satisfactory. To do this, look at the type of file offered for downloading: you need an update option via USB. Then we check the language support, since updating with the English version will turn the entire TV menu into “English”. The downloadable version will contain a multilingual format.

Step 6. If the firmware is suitable in all respects, then download the file to the computer.

Step 7 Now we take a prepared blank USB drive and copy the saved information there.

Step 8 Close all unused programs on the computer. Launch the file unpacking program software update. To do this, just double-click and press “extract”.

Step 9 We wait until the process of extracting the firmware files is completed and remove the USB drive from the computer.

Step 10: Install the flash drive with the unpacked firmware into the USB connector on the TV.

Step 11: Activate the software update. We enter the menu. Select “support”, then “software update”, then “via USB” and confirm “yes”.

To correctly install the firmware on your TV, you must do the following:

  1. Do not touch or move the USB drive
  2. Do not turn off the TV's power or put it into standby from the remote control
  3. Do not disconnect the TV from the power supply (it is advisable to use a UPS)


2024 wisemotors.ru. How it works. Iron. Mining. Cryptocurrency.