Reset Windows 10 to its original state error. What does it mean to return the computer to its original state. What happens when a function is executed

The new version of Windows, like any other from this family, sometimes gives errors. But the problems appearing in the top ten are not critical, and the very software has its own set of tools and tools that allow you to restore performance. So, how to recover the top ten after a failure, using only the internal mechanisms of the most operating system- the topic of the article.

System Restore

With its help, the previous, working, registry settings and system files... Recovers the system from a checkpoint saved when the computer was stable.

The top ten provide for saving such recovery points once a week at automatic mode and before installing applications, drivers, OS updates. A checkpoint can be created by the user himself in manual mode.

Procedure

You can restore the system even when the "ten" is not loaded. If the computer cannot boot, you will be able to observe the following picture:

Restoring your computer to its original state

Restoring Windows 10 to its original state can be done:

1. With the proviso that custom content and some pre-installed applications will be saved. But all programs that you installed, operating system settings and driver settings will be deleted.
2. With the proviso that no user data and settings are saved. You will get a clean operating system as after reinstallation.

Important information! If your PC, laptop or computer has a factory (from the manufacturer) "dozen", you have a third option - to return the original, clean, parameters. All user information and content of all hard disk partitions will be deleted in the system.

How to return Windows 10 to its original state

Step 1 From the Start menu, click Settings.

Rollback to a previous version of the system (Windows 7 or 8)

Any updates to the "top ten" will be removed, but personal information stored in the folders, and all programs, drivers and parameters of the "seven" / "eight" will be preserved.

To roll back the operating system (go to a previous version), find the Settings tab in the Start menu. In it, you must select the "Update and Security" item, and then the "Restore" function. Here you can return to the "seven" or "eight" by pressing the corresponding button.

Reinstall Windows 10 from a recovery disc

To create a recovery disc, follow these two steps:

Step 1 Connect the disk or flash drive to your computer.

Step 2 In the "Recoveries" section, select "Create a recovery drive" and follow all the steps.

How to restore Windows 10 from a backup

• Select the OS image with the desired date.
• If necessary, you can use additional options, for example, format the disk.
• Agree to roll back the system and wait for the procedure to complete.

Windows 10 boot repair

The procedure is as follows:

If the startup did not recover in automatic mode, overwrite the files of the bootloader and its partition manually by doing two steps:

How to restore Windows 10 system files

Mar 3 2015

How to restore a Windows 7 system on a laptop, a black screen appears when booting, the recovery environment does not work, I deleted everything hidden partitions, there is no original Windows 7 disk.

Spent a lot of time, tell me what to do now, or at least how to insure myself against such situations in the future, preferably without using paid data backup software.

How to restore a Windows 7 system

Unfortunately, the reasons for this trouble are enough, ranging from incorrectly written drivers, harmful actions of a virus, errors file system and ending with our erroneous actions when working with a computer, there is no need to be afraid of such problems, you need to learn how to deal with them effectively.

Let's think about how to restore the windows 7 system, as well as insure ourselves for the future from possible troubles using the backup and recovery tools built into the operating system.

We will learn how to restore Windows 7 without applying third-party programs on backup even when the System Recovery Options are not loaded and the F-8 button will be useless.

Has in its arsenal a powerful enough and good tool-> The recovery environment, which is created automatically when installing Windows 7 in a hidden partition and contains five other tools that solve numerous malfunctions and problems.

Note: If you learn to use the right tools Windows recovery 7, and this is not difficult, you can do without additional and paid data backup programs.

You can start the recovery tool by pressing the F-8 button on your keyboard immediately after starting your computer. After that, you will see the Advanced Boot Options menu: Computer Troubleshooting, then Safe mode Safe Mode with Boot network drivers etc.

Small digression: Before choosing Troubleshoot computer problems, try the easier option - Last Known Good Configuration - in simple words, the operating system always remembers the last successful boot of the computer and enters this information into the registry.

In case of problems with loading, Windows can remember the registry parameters and driver settings that were used at the last successful boot of the system and use them if you select the Last Known Good Configuration option.

If this tool does not help, select the first -> Computer troubleshooting,

Next, we get to the Recovery options menu Windows systems 7, we need it, it is here that we can choose the System Restore Tool we need, there are five of them, let's take a closer look at how they all work.

The first thing to do is apply Startup Repair (Automatically fix problems that prevent Windows from starting).

Desired digression: After pressing the F-8 button when the computer boots, you may not have the item> Troubleshoot computer problems, but only Safe Mode, and so on, the question arises why.

When installing Windows 7, the recovery environment partition is created automatically and is located in the root of the drive (C :) in the Recovery folder. You can also see in the Disk Management window - separate, hidden section hard drive, its volume is only 100 MB, it is used to store boot configuration files (BCD) and the system boot loader (bootmgr file).

You can see it on Computer-> Management-> Disk Management. In no case should you delete this partition (many people delete it out of ignorance), otherwise you will not start the recovery environment, that is, you will not have the item Troubleshooting computer problems, and in more severe cases, you simply will not boot the system.

On the lower screenshot, you can see another hidden partition, with a volume of 9.02 GB, this is a hidden recovery partition with the factory settings of my laptop, you may have it larger or smaller. It is also better not to delete it, if necessary, you can always restore Windows 7 from it.

What to do if you do not have a partition with the recovery environment and when you press the F-8 button in the Advanced Boot Options menu, the item Solving computer problems does not appear? How do you restore your Windows 7 system then?

The installation disk with the Windows 7 operating system can save here. You can run the recovery tool by booting from the original installation disk Windows 7 by selecting System Restore at the very beginning.

If you don't have the installation disc, then you can use the Windows 7 Recovery Disc (you can make it in any running Windows 7) in five minutes, then you can also boot from it and do the same.

So, we still got to the System Recovery Options, either using the F-8 button and the Troubleshooting item, or the installation Windows disk 7 or Windows 7 Recovery Disc.

In the Select System Restore Tools menu, select the first:

Launch recovery-> analysis of faults interfering with normal booting Windows 7 and their further correction for normal loading and functioning of the operating system.

In the process, we may be warned that problems were found in the boot parameters, click Fix and restart.

System Restore-> using this function, we will be able to select a previously created system restore point, if we have it enabled, and roll back to the time when our Windows 7 worked fine and booted, everything is simple here.

System image recovery-> I personally use this tool, with skillful use it can be replaced paid programs on data backup, if interested, read on.

What is it good for? It will help when you do not have the original Windows 7 installation disc and you have deleted the hidden partition with the factory settings of your laptop, but that's not all.

Sometimes there are situations when, for various reasons or due to the actions of a virus, you will not be able to boot the operating system at all, or many people ask How to restore the Windows 7 system, even if the menu with Additional boot options is also unavailable. Reinstall the operating system again?

Therefore, immediately after Windows installations 7 to your laptop or computer, we create with this function -> System Image Restore, an archived image of our Windows 7 on the hard drive, we save it.

Be sure to create a Windows 7 Recovery Disc (see below), it will help you use the System Image if the Advanced Boot Options menu will not load.

We go to Start -> Control Panel -> Archiving computer data.

We select "Create a system image".

In my case, Local Disk (E :), if you have system unit several hard drives, then of course it is better to place the backup on the hard drive where the operating system is not installed.

By default, the data backup program will select the partition with the Windows 7 operating system itself; if you wish, you can add Local drives for backup yourself, if only you have enough space.

Note: You can see that I have two operating systems installed on a laptop, so the backup program selected two Local drives.

Click Archive and the process of creating an archive with our Windows 7 will begin.

Created, it will look like this.

Now, if necessary, you can deploy the archive with Windows 7 to your computer in 20-30 minutes. It will be better if you copy the archive with the system additionally to a portable HDD, this will make you doubly safe.

Let's imagine that we cannot start Windows 7 and deploy the backup we created, do it together.

We launch the Windows 7 Recovery Tool by pressing the F-8 button on the keyboard immediately after starting the computer.

The Advanced Boot Options menu opens, select Troubleshoot computer problems.

System image recovery

Use the latest available system image.

Of course, all our data is on Local disk where the operating system is currently being restored will be deleted, so you can pre-boot from any Live CD and copy what you need.

How else can you restore your Windows 7 system? With the help of Windows 7 Recovery Disc, of course.

Let's create one that can be used to boot the computer, it will contain recovery tools with which you can restore Windows 7 boot failures, as well as restore the operating system from an archive copy that we created in advance.

Important: The system bitness is important for the recovery disk, you can use a 32-bit recovery disk for any 32-bit Windows 7, and a 64-bit recovery disk for any 64-bit Windows 7.

Going again Archiving computer data.

Create a system recovery disc, insert the DVD into the drive, click "Create Disc".

When boot disk Windows 7 recovery is ready, put it in a safe place.

In order to restore Windows 7 from the Recovery Disc, you do not need, in principle, any working operating system at all.

You only need to change the boot priority to the floppy drive in the BIOS of your computer, insert the recovery disc into it and restore your Windows 7 using the archive.

Many people here can draw an analogy with data backup programs and this is correct, they work according to the same principle, only their functionality is, of course, more convenient.

Recovering Windows 7 from the Recovery Disc. I am showing you how to do it. Let's say we are in trouble, we cannot start Windows 7, when we press F-8 on the keyboard immediately after starting the computer, nothing happens.

We cannot get into the menu with Additional boot options and an error message is displayed. In this case, the system archive on the hard disk is not available to us. It was this kind of trouble that happened to our reader Ilya, who wrote us a letter asking for help.

In this situation, many reinstall Windows 7 from scratch, but not you and me, because we have a System Restore Disc.

We insert it into the floppy drive and reboot, set the BIOS to boot from the floppy drive, as I said the boot disk, the System Recovery Options program starts.

Press Enter until the offer to boot from disk disappears.

An automatic recovery tool running from a disk will try to repair Windows startup 7.

If all else fails, choose any tool, try, for example, Restoring your computer using the previously created image of the operating system.

We use the last available system image.

What other ways are there to restore Windows 7?

There is another little-known way to restore Windows 7 boot after a crash, and I'll tell you about it. At first glance, it will seem difficult to many, but nevertheless it often helps me out.

The fact is, friends, that a very large part of the problems due to which you cannot boot Windows 7 lies in registry errors. And Windows 7 wouldn't be Windows 7 if it didn't have a mechanism to protect registry files. Such a mechanism exists and creates archive copies of the registry in the RegBack folder every 10 days, regardless of whether you have system restore enabled or not.

If you cannot solve problems with booting Windows 7, you should try replacing the valid (and apparently damaged) registry files from the Config folder with archive files from the RegBack folder. To do this, we will have to boot the computer from a Windows 7 installation disc or a Windows 7 recovery disc.

Boot into the recovery environment, select the command line.

We type in it - notepad, we get into Notepad, then File and Open.

We go into the real explorer, click on My Computer. Now we need system disk C :, attention, the drive letters here may be confused, but the system drive C: I think you can find out by the system Windows folders and Program Files.

We go to the C: \ Windows \ System32 \ Config folder, here are the valid registry files, specify the File type - All files and see our registry files, we also see the RegBack folder, in which the Task Scheduler makes a backup copy of the registry keys every 10 days.

So, we will replace the current registry files from the Config folder backup files registry from the RegBack folder.
So, first of all, let's delete from the C: \ Windows \ System32 \ Config folder the SAM, SECURITY, SOFTWARE, DEFAULT, SYSTEM files, which are responsible for all the registry hives (my advice is to copy the registry hives somewhere just in case, just in case).

In their place, copy and paste files with the same names, but from a backup copy, that is, from the RegBack folder.

Note: All files SAM, SECURITY, SOFTWARE, DEFAULT, SYSTEM cannot be deleted, delete them one by one. Then copy the same files from the RegBack folder to their place.

Friends, if this did not help, apply Windows 7 file integrity recovery, if the operating system does not boot, it is done in the same way as in Windows 8.

What else do we have from Windows 7 recovery tools?

Memory Diagnostics 7-> checks the system memory for errors. Command line-> with it you can delete files that interfere with the boot of Windows 7.

I hope our article on how to restore your Windows 7 system helped you.

When resetting your computer fails in Windows 10, an error occurs when you try to reinstall Windows computer to the default state.

In this tutorial, we will first learn what Windows 10 reset is and the conditions that lead to the PC reset problem. And later we will move on to the solutions to fix "An error occurred while restarting the PC" in Windows 10 operating system.

As we all know, resetting Windows 10 helps fix various errors as they can interfere with the normal operation of our computers. But in some cases, the error message "There was a problem restarting the computer." Changes in Windows 10 are completely impossible.

Why am I getting the "Problem resetting my PC" error?

Case (I): If your laptop / computer was preinstalled with Windows 10 and it was not an update of the Windows 7 or Windows 8.1 operating system.

Case (II): If your PC manufacturer has enabled compression to reduce the disk space required for pre-installed applications.

Case (III): If you booted your PC to a USB drive and then select Troubleshoot → Reset This PC → Erase Everything.

Please be aware that the above conditions are for reference only, other conditions may also result in "There was a problem restarting your PC" on Windows 10 computers.

How do I fix this problem?

There is no need for any special skills to use these methods as the steps are explained in detail. Try the methods below to fix it. There is a problem restarting your computer. There were no changes.

Method 1: using the command line

Step 1): First of all, click Windows keys+ I together to open Windows settings, and then select Update & Security → Recovery.

Step (2): Now in the "Advanced Startup" section, click the "Restart Now" button

Step (3): in the new window select Troubleshoot -> Advanced options -> Option command line.

Step (5): Now, in the Command Prompt window, enter the following command lines and then press the Enter key after each command:

Cd% windir% \ system32 \ config ren system system.001 ren software software.001

Step (6): after executing all the commands, close the command prompt window. You will now be taken to the download options page. Here, click on the "Continue" button to boot your computer.

Now you can try restarting your Windows 10 computer and you should be able to restart your computer without any problem. And if the problem still persists, go to the next method.

Method 2: use a recovery drive to reinstall Windows 10

If the above solution cannot fix the error reset windows 10, you can try using a recovery disc to reinstall. Here's how to do it:

Step 1). Insert first USB flash drive 8 GB, 16 GB or 32 GB per computer.

Step (2). Now enter recovery drive in the Start menu search box and select Create recovery drive from the search results.

Step (3). Since restoring your PC from disk will delete all current files and applications, so here you need to select the option “Back up system files to recovery disk” to back up your data and then click “Next”.

Step (4): In the next window, select your USB flash drive and click the Next button.

Step (5): Now, to create a recovery drive, click Create. And once the process is complete, click the Finish button.

Step (6): After that, restart Windows 10 and then press a specific key like F12, Esc, F9, or any other key (depending on your PC brand) to go to the boot options page. And proceed to boot from the USB stick.

Step (7). Finally, click on "Recover from Disk" and follow the instructions that appear on your computer screen.

Method 3: perform a clean install of Windows 10

If you still cannot get rid of the problem "Resetting your PC", try performing a clean install of the Windows 10 operating system. Follow the steps below for the installation procedure:

Important note. Before doing clean install Windows 10 needs to run backup files to ensure that important files are not lost due to formatting.

Step 1): First of all, insert the Windows installation media (DVD, CD, or USB) containing the installation windows file 10 and then start your computer.

Step (2): Now press the key to boot from the installation media (USB or DVD) and format the disc.

Step (3): Finally, follow the instructions on the screen to reinstall a fresh copy of Windows on your computer.

This is the best and most efficient way to fix it. There is a problem restarting your computer in Windows 10.

Final thoughts

This way you can fix it easily. There was a problem resetting your PC error on Windows 10 as it is one of the most common errors and the above solutions will help you fix them effectively. If you still face any issues or have questions regarding resetting Windows 10, please contact us in the comments section.

Restoring Windows 10 is the process of getting the OS back to a working state. You can restore the OS to its original state, or you can restore the system to a specific date. In this article, we will tell you all the ways to restore Windows 10. There are a lot of ways, but you only need to choose one that matches your problem. Therefore, we have broken down all recovery methods according to the problems that these methods cope with.

Problems appeared after installing a new program

Computer won't start

Deletion of personal data

An error occurred while resetting the computer

• Recover OS from clean Windows assemblies 10;
• Reinstall Windows 10;

Reverting to a previous version of the OS

System Restore is an important Windows feature as it allows you to restore certain items to a working state. very worried about the possibility of active users, because then backup copy becomes useless, and a founded hope rests on it.

System Restore does not work: reasons

If System Restore does not work, most likely the cause is at one of the steps in the procedure. Restore points themselves are often unusable if they are damaged due to viral exposure or improper user manipulation.

It is also likely that the function itself has some glitches, they should be fixed, the problem is periodically observed during Windows updates, over time the situation is solved by the corporation by the manufacturer.

Windows System Restore does not work due to lack of system integrity, if it contains incorrect registry settings, broken keys, files are damaged or conflicting.

Windows 10 system recovery error has become widespread recently, so Microsoft posted a fix for this situation. Immediately, we note that this action is somewhat difficult, since it is very long, it is necessary to strictly adhere to the instructions.

Usually this problem followed by the code E_UNEXPECTED (0x8000FFFF). So, you need to manually fix the following components:

1. You need to download and install Windows AIK on your computer;

1. Now you should create windows image RE environment, the action is performed like this:
   1. Find installed element in the All Programs list;
   2. Win + R and enter cmd;
   3. It is necessary to duplicate the Install.wim file, it should be taken from the installation disk. You can complete the procedure using the commands:
      1. md C: \ OS_Duplicate
      2. md C: \ OS_ Duplicate \ mount

• copy D: \ sources \ install.wim C: \ OS_ Duplicate, here D - should be replaced with the letter of the installation media.

1. Use the ImageX command to use the file just created, for this, insert ImageX / mountrw into the console C: \ OS_ Duplicate \ install.wim 1 C: \ OS_ Duplicate \ mount;
2. The Windows RE image must be copied from the installation image. The procedure is easy to perform:
   1. md C: \ WindowsRE
   2. md C: \ WindowsRE \ mount

• copy C: \ OS_ Duplicate \ mount \ windows \ system32 \ recovery \ winre.wim C: \ WindowsRE \

1. You can delete the generated image using the ImageX / unmount C: \ OS_ Duplicate \ mount command, but only after completing the previously described procedure.

1. Now the preparatory stage is over and should be corrected Windows environment RE. Actions are as follows:
   1. The image generated earlier should be launched using the ImageX / mountrw command C: \ WindowsRE \ winre.wim 1 C: \ WindowsRE \ mount;
   2. Now the fix needs to be installed using
   3. Dism / image: C: \ WindowsRE \ mount /Add-Package:c:\TEMP\Windows6.1-KB2709289-x64.msu
   4. The procedure should pass without complications, you can make sure of the correct result using
   5. Dism / image: C: \ WindowsRE \ mount / Get-Packages;
   6. Changes should be saved thanks to ImageX.exe / unmount / commit C: \ WindowsRE \ mount.
2. The final stage in the formation of the carrier of the RE environment is:
   1. A new file is needed to help create an image, formed using
      cmd amd64 C: \ WinREx64;
   2. The Winre.wim file must be duplicated in the ISO \ sources path and its name must be changed to Boot.wim. This is done copy C: \ WindowsRE \ winre.wim C: \ WinREx64 \ ISO \ sources \ boot.wim;
   3. You should mount the image to any virtual or physical disk.

Solution for error 0x800070091

Another kind of problem that will probably be fixed in future system updates. Especially often an error is provoked by a preliminary Windows update... Often an update was made between the backup point and the current point in the top ten, and its rollback causes an error. Fortunately, it is not difficult to eliminate such an error.

To return a working state for a function, you just need to delete the WindowsApps folder, but it is protected by the system from being changed. So you should first change access rights, the easiest way is to do this with the command TAKEOWN / F "C: \ Program Files \ WindowsApps" / R / D Y - so a group of users with administrator rights will be able to edit the folder and data in it. Sometimes the procedure takes a long time.

Now you should enable the display of system and hidden folders. This is done in the "Folder Options" section in the "View" tab.

Then you can manually go to the folder located in Program Files and you need to remove it, first it is better to rename it. Alas, the folder contains files used by the system, so you have to use Unlocker, select the Rename function and add any letter or number to the folder.

System check

You need to run a tool that checks the system components. In Windows, such a function is already built-in, it only needs to be used through the console.

1. Press Win + R and cmd;
2. Enter sfc / scannow.

A comprehensive check of the integrity of system components, including the recovery function, will be performed. This often has a positive effect, but sometimes you have to manually restart the function. It is necessary to delete all previous points and create a new one, then try to roll back to it.

As a last resort, you will have to reinstall or update the system, if such a function is present. In some cases, the Microsoft Fix It utility helps.

In laptops there is a built-in Recovery Manager, so you can use it to roll back to the factory state.

Usually, the above actions quite help to restore the correct operation of the functionality, and only as a last resort you will have to resort to a rollback or reinstallation of the system.

If you still have questions on the topic "What to do if an error occurred while restoring the Windows system?", You can ask them in the comments

if (function_exists ("the_ratings")) (the_ratings ();)?>