Wireless router tp link tl wr741nd. Setting up an Internet connection on a tp link tl wr741nd router. Connecting a computer to wi-fi

Setting up the router involves changing the necessary parameters in the device interface. The purpose of the setting can be not only to connect to the Internet, but also such operations as, for example, setting up a local network, changing passwords, setting ports. This article provides the most understandable instructions on "how to configure the TP-LINK WR741ND router" in various ways.

Type and purpose of indicators

To display the activity of certain processes and functions, the router has special indicators located on the front panel of the router.

The indicators have intuitive icons that show the activity of processes or device connections:

device power indicator;
function of testing the router for errors. If the indicator flashes periodically, no malfunctions were detected, if not, errors were found in the system accordingly;
Wi-Fi module activity;
LAN port indicators display connected computers to the device;
indicator of device connection to the Internet;
QSS system.

Connecting to a computer

Connecting the TP-LINKTLWR741ND router to a computer is carried out with using Wi-Fi or LAN cable.

Router interface

To enter the router interface after connecting it, you must:

open browser;
enter the address 192.168.1.1;
enter login and password. Admin, admin are installed by default.

As a rule, the username and password of the device is indicated on the rear panel of the device itself. If your router is provided by your provider, the login and password parameters for logging in may differ.

Internet connection

Internet connection is carried out both using the setup wizard, which can be launched from the disk that comes with the router, and using the web interface. To configure, you will need the values specified by the provider in the contract.

Before you start configuring the router settings, make sure that in the settings of your network card no IP address set. For a correct connection, the option must be selected - obtain an IP address automatically.

Configuring a TP-LINK TL WR741ND router Kyivstar

To set up promotional routers from Kyivstar, you need to:

go to the device interface (192.168.1.1). The login and password are often changed by providers who provide the router, for example, on kyivstar routers, the password and login are kyivstar;
open the "Network" tab and go to the "WAN" section;
select "Dynamic IP Address" and click "Save";

To configure security, you need to open "Wireless Mode" and go to the "Protection wireless mode»:

You can also change the default password WiFi networks to a more complex one that can provide a higher degree of protection.

Quick Setup

Quick setup of the TP-LINK WR741ND router allows you to configure settings even for users who do not have experience in setting up an Internet connection. For quick setup, you need to go to the device interface and select the "Quick Setup" menu. If you do not know the type of your Internet connection, then during the installation process it is recommended to select the "Auto-detect" item.

You will also need to enter your username and password, which are provided by the provider. With this function, the program will suggest the most appropriate settings for your connection. After applying all the settings, you must reboot the router for the new settings to take effect.

Video: TP-LINK TL-WR741ND quick setup

Manual setting

To set VPN connection parameters, perform the following operations:

open the "Network" menu section and go to the "WAN" item.
in the "WAN Connection Type" field, set the type to PPTP.
the User name and Password fields are filled in according to the data from the contract.
if your ISP provides separate settings for the IP address, max subnet, and gateway, you will need to enter these values in the appropriate fields.
After entering all the parameters, click on the "Save" button.

To set up a PPPoE connection, do the following:

To set up a connection without a VPN connection, you should:

It is also worth mentioning the fact that some providers filter by the computer's MAC address.

To solve this problem, just do the following:

Setting for operators MTS, Beeline (Beeline), Rostelecom

The settings for various operators, whether it be Beeline or MTC, differ only in the provided values of IP addresses, subnet masks and other parameters. Some operators specify these settings in the contract.

WiFi setup

Wi-Fi is configured from the "Wireless Mode Settings" subsection, which is located in the "Wireless Mode" tab:

The local network

To configure the local network of the TP-LINK TL WR741ND router, you must perform these operations:

go to the "Network" menu and open the "DHCP" section;
enable "DHCP server";
specify the range of addresses that will be assigned to computers in home network. For example, the first address is 192.168.1.100 and the last one is 192.168.1.200;
save settings.

The TP-LINKTLWR741ND router has a fairly simple and intuitive interface that allows you to establish an Internet connection, as well as configure various settings without any inconvenience. And thanks to the quick setup, connecting to the Internet is the easiest

Question answer:

How to set up a device on Windows 7?

Setting up the TP-LINKTLWR741ND router on various operating systems differs only in setting the option to automatically obtain an IP address when connected.

For Windows 7: Control Panel - "Network Center" - "Change adapter settings" - "Your connection properties" - "Internet Protocol version 4 (TCP / IPv4)" - Open properties - "Obtain an IP address automatically".

What are the features of the router settings on Windows 8?

Connecting and setting up the Internet in Windows 8 is similar to setting up the Internet in Windows system 7, so you will not have any unexpected problems during the setup process.

What to do if there is no software disk?

How to set up without a disk? by the most simple solution in this situation is to download this software on the Internet, if this is not possible, then it will help you manual setting Internet settings of the TP-LINKTLWR741ND router.

Type and purpose of indicators

To display the activity of certain processes and functions, the router has special indicators located on the front panel of the router.

The indicators have intuitive icons that show the activity of processes or device connections:

device power indicator;
function of testing the router for errors. If the indicator flashes periodically, no malfunctions were detected, if not, errors were found in the system accordingly;
Wi-Fi module activity;
LAN port indicators display connected computers to the device;
indicator of device connection to the Internet;
QSS system.

Connecting to a computer

The TP-LINKTLWR741ND router is connected to a computer using a Wi-Fi or LAN cable.

Router interface

To enter the router interface after connecting it, you must:

open browser;
enter the address 192.168.1.1;
enter login and password. Admin, admin are installed by default.

As a rule, the username and password of the device is indicated on the rear panel of the device itself. If your router is provided by your provider, the login and password parameters for logging in may differ.

Internet connection

Before you start configuring the router settings, make sure that no IP address is set in the settings of your network card. For a correct connection, the option must be selected - obtain an IP address automatically.

Configuring a TP-LINK TL WR741ND router Kyivstar

To set up promotional routers from Kyivstar, you need to:

go to the device interface (192.168.1.1). The login and password are often changed by providers who provide the router, for example, on kyivstar routers, the password and login are set to kyivstar;
open the "Network" tab and go to the "WAN" section;
select "Dynamic IP Address" and click "Save";

To configure security, you need to open "Wireless Mode" and go to the "Wireless Security" section:

You can also change the default wifi password network to a more complex one that can provide a higher degree of protection.

Quick Setup

Video: TP-LINK TL-WR741ND quick setup

Manual setting

To set VPN connection parameters, perform the following operations:

open the "Network" menu section and go to the "WAN" item.
in the "WAN Connection Type" field, set the type to PPTP.
the User name and Password fields are filled in according to the data from the contract.
if your ISP provides separate settings for the IP address, max subnet, and gateway, you will need to enter these values in the appropriate fields.
After entering all the parameters, click on the "Save" button.

To set up a PPPoE connection, do the following:

To set up a connection without a VPN connection, you should:

It is also worth mentioning the fact that some providers filter by the computer's MAC address.

To solve this problem, just do the following:

Setting for operators MTS, Beeline (Beeline), Rostelecom

WiFi setup

Wi-Fi is configured from the "Wireless Mode Settings" subsection, which is located in the "Wireless Mode" tab:

The local network

To configure the local network of the TP-LINK TL WR741ND router, you must perform these operations:

go to the "Network" menu and open the "DHCP" section;
enable "DHCP server";
specify the range of addresses that will be assigned to computers on the home network. For example, the first address is 192.168.1.100 and the last one is 192.168.1.200;
save settings.

Question answer:

How to set up a device on Windows 7?

Setting up the TP-LINKTLWR741ND router on various operating systems differs only in setting the option to automatically obtain an IP address when connected.

For Windows 7: Control Panel - "Network Center" - "Change adapter settings" - "Properties" of "Your connection" - "Internet Protocol version 4 (TCP / IPv4)" - Open properties - "Obtain an IP address automatically".

What are the features of the router settings on Windows 8?

Connecting and setting up the Internet in Windows 8 is similar to setting up the Internet in Windows 7, so you won’t have any unexpected problems during the setup process.

What to do if there is no software disk?

How to set up without a disk? The easiest solution in this situation is to download this software on the Internet, if this is not possible, then manually setting the Internet parameters of the TP-LINKTLWR741ND router will help you.

In one of the previous articles, we are talking about setting up a TP-Link TL-WR 841ND with a hardware firmware version v.8.2 for the Interzet provider.

The purpose of this article is to describe the tuning process of its younger brother N-line - router TP-Link TL-WR 741ND, firmware version v.4.

More providers strive for versatility and simplicity user settings, so today we will consider connecting using a dynamic IP address.

Step 1. Connecting the computer to the router

A typical complete set of home routers is the router itself, power supply, user manual, patch cord for carrying out.

So, all we need at this stage is:

1. Connect the router to the power supply. If the indicators on the front panel do not light up, check if the router's power button is turned off, which is located on its rear panel near the power connector.

The enabled QSS mode does not contribute to this due to a vulnerability found in 2011, so we disable it.

Go to the "QSS function" section and click the "Disable" button.

This feature is usually enabled by default and we recommend that you disable it when you first set up your router.

Let's move on to setting up an Internet provider connection.

We go to the "Network" section, the "WAN" menu in the "Type of WAN connection" drop-down list, select "Dynamic IP address". Then click the "Save" button.

Some ISPs perform what is known as binding a MAC address to a network connection.

On the this moment this trend is losing its relevance, but if it is still relevant for your connection, go down 2 points to the "Copy MAC address" menu.

In this menu, to change the MAC address of the router to the MAC address of the computer, click the "Clone MAC address" button, and then click "Save".

Now let's set up the wireless network.

We go to the "Wireless Mode" section, the "Wireless Mode" settings menu.

In the network name field, write the name that our wireless network will receive, there are no restrictions in the name, write any you like.

We select a country in the "Region" field, please note that some of the available broadcast channels are closed for some countries.

In the channel menu, select "Auto", so the router itself will look for the least loaded data channel.

In the "Mode" menu, select "11bgn mixed", so devices that do not support n-standard (150Mb / s) will be able to work in g-standard (54Mb / s).

For most cases, automatic channel width selection will do.

We put a tick, activating the wireless broadcast of the router, and turn on the broadcast of the network name (SSID) on the air. We save the changes.

After activating the wireless network, you need to protect it from unauthorized access. Go to the "Wireless Security" menu and select the encryption method for the network.

Select "WPA-Personal/WPA2-Personal (Recommended)".

For correct operation devices that do not support WPA2, we recommend that you select "Automatic" in the "Version" field.

In the encryption selection field, select "AES". In the password entry field - "PSK Password" - enter the password to access the wireless network.

The longer your password is, the better. The group key update period is written in seconds, in the example 43200 seconds are indicated, i.e. 12 hours. We save the changes.

Moving through the router settings menu, go to general settings security. We turn on the SPI firewall, and disable all other parameters.

Important: When setting up security, you should always follow the rule of disabling all unnecessary services and closing all unnecessary ports. We save the settings.

In addition to these security settings, be sure to change the standard login and password.

To do this, go to the "System Tools" section, the "Password" menu, enter the current username and password, and then write down the new credentials.

We save the changes.

When all the settings are done and everything works, the final step is to save all the settings. Let's go to the menu Backup copy and Restoration.

To save the settings, click the "Backup copy" button, after which in the window that appears, save the settings in a place convenient for you.

To perform the reverse process, go to the same menu, but instead of the "Backup" button, click the "Select File" button, find the settings file and click the "Restore" button.

Sometimes there is a need to reset all settings to factory settings. For example, after performing a series of settings, the router did not work correctly.

To do this, go to the "System Tools" section, select the "Factory Settings" item and click "Restore".

But what if you forgot the password to connect to the wireless network or to enter the router settings?

Do not despair!

Resetting the settings can be done with the router turned on, press the Reset button (located on the back of the router) and do not release it for 10 seconds.

After that, release the button, as a sign of resetting the settings, the indicators on front panel should blink, after which the router should reboot.

After resetting the settings, you should use the standard login and password to access the settings.

TP Link WR741ND wi fi setup in three clicks

TP-Link TL-WR741ND Router Setup (Tablet and Desktop)

The TL-WR741ND router from TP-Link belongs to the middle class of devices with some advanced features like a wireless radio station or WPS. However, all routers from this manufacturer have the same type of configuration interface, so correctly configuring the router in question is not a problem.

Immediately after purchase, any router must be properly prepared: installed, connected to the power supply and connected to a PC or laptop.

Configuring the TL-WR741ND

Setting the parameters of the router in question is no different from the same operation for other TP-Link devices, but it has its own nuances - in particular, the appearance and name of some options on different firmware versions. It is recommended to install the latest version of the router software - you can learn about the features of the procedure from the further manual.

The configuration interface of this device can be accessed as follows. Call the browser and type in the input line the address 192.168.1.1 or 192.168.0.1 . If these options don't work, try tplinkwifi.net. The exact data for your copy can be found on a sticker glued to the bottom of the case.

The combination for logging into the router interface is the word admin as the username and passphrase.

You can configure the router in two ways - through quick setup or by manually setting the necessary parameters. The first option saves time, while the second option allows you to configure specific options. We will describe both, and leave the final choice to you.

Quick Setup

Using this method, you can enter the basic connection parameters and wireless communication. Do the following:

Wait for the router to reboot and the device will be ready to go.

Manual tuning mode

Entering parameters on your own is not much more complicated than the automatic method, but unlike this option, it allows you to fine-tune the behavior of the router for yourself. Let's start with setting up an Internet connection - the necessary options are located in the section WAN menu item "Net".

The device in question supports connection via all protocols common in the post-Soviet space - consider the configuration for each of them.

The PPPoE connection is still one of the most popular and is the main one for state-owned providers like Ukrtelecom or Rostelecom. It is configured like this:

L2TP and PPTP

VPN connections such as L2TP or PPTP on the TL-WR741ND router are configured according to the following algorithm:

Dynamic and static IP

These two connection types are much easier to set up than the others.

After setting up the Internet, the router needs to be rebooted - to do this, open the block "System Tools", select an option and use the button "Reload".

WiFi setup

The next configuration stage is setting the wireless network parameters, which consists of two stages: wifi settings and security settings.

Now let's move on to the security settings.

After saving the settings, restart the router and try to connect to Wi-Fi. If you did everything right, the network will be available.

WPS

Most modern routers are equipped with a function Wi-Fi Protected Setup otherwise WPS.

On some device variants from TP-Link, this option is called QSS, "Quick Secure Setup".

This feature allows you to connect to the router without having to enter a password. We have already covered the WPS capability settings on a variety of routers, so we advise you to read the following material.

Change of access data to the interface

For security reasons, it is better to change the data for access to the admin panel of the router. You can do this in paragraphs. "System Tools" — "Password".

Conclusion

That's all we wanted to tell you about configuring the TP-Link TL-WR741ND router. The instruction came out detailed, and there should not be any difficulties, but if problems are observed, then ask a question in the comments, we will try to answer it.

It's no secret that the standard firmware of inexpensive home routers often does not meet the requirements of users, or it lacks any features that have become necessary during the development of a home network. This usually refers to support for some other ISP connection options, IPTV technologies, advanced route management, and the like, which are sometimes forgotten to be specified in official specifications.

In this article, we will try to see how suitable a budget router is for firmware from the well-known OpenWRT family. For the first acquaintance, the TP-Link TL-WR741ND model, which has been on the market for a long time, was used. It uses an entry-level platform, does not differ in large amount of flash memory or the presence USB port. Interestingly, this device has been slightly updated several times while retaining the name. The manufacturer only changed the version, in this article we worked with v4.20 (you can check it by the sticker on the box or router), which differs in appearance and hardware from the first revisions.

Delivery set and appearance

Mass models of routers have standard delivery sets - a device, an external power supply (this time 9 V 0.6 A), a removable wifi antenna, network patch cord, leaflets and a CD with an electronic version of the documentation. Everything you really need is present, and you could refuse a network cable.

The design of the box is also traditional - a photo of the router, use cases, specifications. As we said above, not a word about Internet connection modes and compatibility with multicast streams. The site, of course, has more data, but still some questions remain.

By appearance the router is completely ordinary - a strong matte white plastic case, a group of LEDs on the front of the top cover, five network ports (100 Mbps) on the back, a power supply input with a switch, an antenna connector, reset buttons and quick connection wireless devices.

It is worth noting only indicators that are too close - at a distance it will be difficult to read their status (especially since the color is the same for everyone) and not the best location for the QSS (WPS) button - between the antenna and the WAN port.

At the bottom there are four rubber feet and two holes for wall mounting.

Hardware configuration

To implement such a router configuration, a minimum chipset is usually enough. Version 4.20 of the platform consists of an Atheros AR9331 processor running at 400 MHz, 32 MB random access memory, 4 MB flash. The radio unit and five-port 100 Mbps switch are built into the processor. Supports 802.11n at 2.4GHz at speeds up to 150Mbps. You can see the second antenna on the printed circuit board, but it is not possible to determine if it is used and for what. There are no heat sinks on the processor and other microcircuits. During testing, even under heavy load, the processor temperature did not differ much from room temperature.

The board has elements for implementing a console connection, so if you have experience with a soldering iron, organizing it will not be a problem.

Capabilities and performance of standard firmware

Official deliveries of this router model to our market have pre-installed Russian firmware, which has full localization and several additional features(in particular, support for IPTV). However, on the support sites in this moment only international (English) versions are presented.

As a standard firmware, we used a newer non-localized version 3.12.11 Build 120320 Rel.50684n, released this spring. The possibilities are quite typical for the considered class of models. The web interface of this version is available only in English. You can set restrictions on access to it from the local network segment and the Internet.

To connect to the Internet, fixed and dynamic address, PPPoE, PPTP and L2TP are supported. Moreover, in the latest versions, access to the provider's network is also supported. The built-in DDNS client can help organize remote access. Addresses in the local segment are distributed by the DHCP server, which maintains IP reservations for the desired MACs.

The wireless module can operate in open network mode, WEP and WPA/WPA2 (as with key phrase, and through the RADIUS server). For additional protection, a wireless client MAC address filter is provided.

There is a port translation function, support for DMZ and UPnP. The router has a firewall with programmable rules, can pass PPTP / L2TP / IPSec traffic, implements the passage of FTP, H.263 and RTSP protocols through NAT. It is possible to restrict access to sites by their names.

The traffic control function allows you to prioritize certain clients and services for downloading and sending data. The system options include updating the firmware, working with the configuration, an event log (with the ability to send it to email), setting the internal clock, changing the administrator password, traffic statistics. These features will be enough for the vast majority of users, unless, of course, they have some very specific provider.

Note that changing some options requires rebooting the device, which is quite acceptable in the class under consideration.

Performance testing was carried out on a special stand using the IxChariot synthetic test. All options for connecting to the Internet were checked, tests were carried out with one / two streams, as well as with simultaneous operation of sixteen streams. The results are presented in the following graph.

As can be seen from the numbers, despite the budget class, TP-Link TL-WR741ND is able to provide 100 Mbps channels with any connection option. This is especially impressive if you remember its hardware configuration. A few years ago, PPTP and L2TP modes on inexpensive routers often could not work at full link speed.

The device supports access to the provider's local network when a VPN connection is established. The second graph shows the results of tests in this mode, while downloading data from the Internet and the provider's network.

It is quite expected that there are no speed limits here either.

The wireless module of the device supports 802.11b / g / n standards, operates at a frequency of 2.4 GHz and has one antenna and a maximum connection speed of 150 Mbps. In fact, today this figure is only achievable in a private home or in the field, since the latest requirements of the Wi-Fi Alliance prohibit devices from using two channels in the 2.4 GHz band in the presence of neighboring networks. So for the test, an Intel 6205 adapter was chosen, which connected at a speed of 72 Mbps, the maximum possible for 802.11n when working with one antenna and one channel. Recall that the adapter itself is dual-band and supports 300 Mbps. Testing was carried out between wireless and connected to the LAN segment clients.

Testing has shown that the actual speed corresponds to the equipment and modes used. It is 40-50 Mbps, and, given the class of the router, these figures can be considered a good result. The access speed of a wireless client to a computer installed in the external network segment practically did not differ from the indicated figures for any type of connection to the Internet.

When the article was already finished and was waiting for its turn to be published, the local office of the manufacturer released a beta version of the firmware (3.12.12 Build 121124 Rel.66062n, you can download it on the technical support forum) with a Russian setup interface and some functions that are relevant for domestic users - IPTV ( in the port allocation mode for the set-top box or multicast, in the second case with WiFi support) and VLAN 802.1Q, which may be of interest for multiservice connections.

Alternative firmware

Although official firmware quite suitable for the implementation of the main scenarios for using the router, for various reasons, there may be a desire to improve the software capabilities of the model. Unfortunately, at budget devices rarely implemented standard installation option additional packages. So the only option might be alternative firmware. But it should be noted that the TP-Link website indicates that a breakdown in the case of using third-party software is not a warranty case.

For our part, we also note that working with alternative firmware may not be as easy as we would like. Hardware versions and software are constantly changing, and not always “last” means “best”. In addition to following the instructions found on the net, it is advisable to use your own head. In some cases, it will be possible to restore the router's performance only using additional equipment. On the other hand, the cost of this device not very large, so it may well be suitable for the first workouts.

It is impossible to describe in detail in the article all the possibilities of alternative versions. Nobody expects detailed information about Windows and all the application programs for it in a laptop review. Luckily, many projects have wikis and forums where you can find the information you need. At the end of the article there are also links to relevant topics in our forum.

One option for the TL-WR741ND model under consideration is the well-known OpenWRT firmware. Getting started with it is quite simple - you need to download the image new firmware from the project website and install via the web interface in the usual way. For a mass user, certain difficulties will be associated with the lack of a familiar web-interface in the basic package. As a solution to this problem, you can use Gargoyle - modified version, which has a built-in add-on for managing firmware options through a browser.

Another way is to install the LuCI package of a similar purpose already inside OpenWRT. In the second case, it is desirable to have access to the Internet from the router for the convenience of installing additional packages.

The capabilities of OpenWRT are noticeably superior to stock firmware, especially if you understand exactly what you need and why, and have at least basic communication skills with operating systems Linux family. But we must not forget about the limited hardware resources of the device in question, so it should not be loaded with “heavy” tasks.

To connect to the Internet, all the same options are provided, which also implement simultaneous access to local network provider. However, the limited amount of flash memory of the router does not allow you to install support for LuCI and L2TP at the same time. simple commands(Direct connection, PPPoE and PPTP do not have this problem). You can, of course, try to select the required set of packages, but we simply abandoned the web interface for testing in this mode. Setting up in the console, of course, is more complicated, but “more correct”, especially if it’s not about “just running”, but also “figuring out how it all works”. Instructions in Russian for starting this type of connection are available on the project website.

Given that router firmware can significantly affect not only capabilities, but also performance, we decided to conduct a speed test of this version similar to the one described above. The original firmware had no comments on this parameter, so the test rather answers the question “whether alternative firmware will ruin the speed” than gives a serious reason to choose a version.

As expected, OpenWRT shows almost the same results as the proprietary firmware. The only caveat concerns device reboot in L2TP multithreaded tests. This can most likely be fixed with module updates or additional setting client. This is just one of those cases when you have to deal with the problem yourself, the official technical support of the manufacturer will not help here.