How to make a microSIM or nanoSIM from a regular SIM card? How to make a nano-SIM from a micro-SIM yourself? From microsim to apply

If you have a modern phone, in particular an ultra-thin model, then you probably know that one of the features of such a device is the use of Nano- sim cards s. These SIM cards are slightly thinner than standard Micro and Mini SIM cards. Despite the fact that the size of the cards is different, the dimensions of the chip on all SIM cards are the same. Therefore, you can make a nano SIM yourself from a regular or micro SIM card at any time. In almost all communication stores, such a transformation of SIM cards is done for money, albeit not much. I assure you, you are certainly capable of cutting a SIM card yourself. But, for those who are afraid of ruining their SIM card, we advise you to seek help from any communication shop.

Due to such a variety of SIM card sizes, some operators sell transformable SIM cards. Which, by extrusion, can be adjusted to fit any of the SIM card slots.

Having bought such a transformable SIM card, you will need to break off a part of the size you need. The big advantage of such a SIM card is that its size can be returned back. The main thing is not to throw away the broken part. You never know, suddenly you change your phone, which will not have a nano, but a micro or regular SIM card.

So, how to cut a SIM card for Nano SIM without damaging it? I offer you two options.

Template for nano SIM card

I suggest you use two templates that will help you correctly cut the SIM card to the size you need. The template will need to be downloaded and printed.

In order to cut a SIM card efficiently and correctly, you will need good and sharp scissors, a strong construction knife or a metal scalpel, a nail file and a working plane in the form of a plastic or wooden board. It is desirable that they be even.

First template. After printing this template, you need to cut it to size and stick it on your SIM card. After that, it is cut to fit a nano SIM card. If the edges turn out to be very sharp or crooked, a nail file comes into play, which can be used to correct everything. But be careful not to damage the chip.

Second template. In order to cut out a nano SIM card using this template, you will also have to use a pencil and a ruler.

We print the template on an A4 sheet and place the SIM card on it. Using a ruler and pencil, draw lines as shown on the template. Now you can cut the SIM card along the drawn outline. But do it carefully, the chip cannot be damaged, otherwise the SIM card can be thrown away.

After the card is cut, install it in the phone and check its operation. I'm sure you managed to do everything correctly, and the SIM card will work.

Happy iPhone owners often encounter a problem that is not obvious at first glance. The color of the phone has been chosen best generation determined, bought a cover, protective glass and power bank too. And they forgot the most important thing - switch from micro-SIM to nano-SIM. And, as many people know, new iPhone will not start without a SIM card inserted. So what to do in such a situation?

What is nano-SIM?

Old generations of cards mobile operators They were quite large in size and became smaller over the years. Fortunately, today, when choosing a suitable tariff and purchasing a new SIM card, customers are given a card the size of a bank card, and it contains three SIM card slots:

• standard;
• micro;
• nano.

Why did Apple, one of the first manufacturers, and then other companies, begin to actively switch to such a small chip size? The thing is that smartphone cases were becoming thinner (by about 20%), and the “filling” required more and more space. Thus, companies have saved on SIM card size for the sake of performance.

How to make a nano-SIM yourself?

There are many ways to make a nano-SIM from a micro-SIM at home - there are templates for cutting on the Internet.

How to make a nano-SIM:

1. Trim the SIM card with thin and sharp scissors.
2. Polish it with sandpaper.

Typically, nano differs from its predecessor by 0.1 millimeters. It's not noticeable, but trying to insert the card into the slot will be unsuccessful. The most latest model Moreover, it is as close as possible to finding the chip that is responsible for the operation of the SIM card. This method is suitable for a person who knows how to cut plastic evenly and clearly.

Replacing a SIM card in a communication store

In both cases, the risk of damaging the chip increases, and the card may not work correctly, or even fail. The best solution would be to go to a mobile phone store with your passport and ask to change the micro-SIM to a nano-SIM. In addition, it would be nice to replace the worn out old card with a new chip. Any operator will easily and quickly change a SIM card for free or make a suitable SIM card for iPhone or

The desire to incorporate rich functionality into modern smartphones forced designers to take a fresh look at the shape of SIM cards. Gadgets require more internal memory space, powerful processors and batteries, it is important to maintain the light weight and compactness of the device. One of the solutions was the use of a new card format - nano. Do you need to cut the SIM card under application? We will tell you how to do this at home.

Cut microsim for nano-sim card

Nano-SIM is the smallest card size, only 12.3 by 8.8 mm. The legislator of the new format was Apple company, having released yet another new product - iPhone 5. At first, mobile operators There were no new type cards, and I had to reduce the SIM card myself.

The easiest way to cut a micro-SIM card under application is to remove all the plastic along the contour of the chip. Just leave a narrow strip on one side to form a beveled corner. This also applies to mini SIM cards with a small chip.

Keep in mind one feature of nano-SIM - it is thinner than mini and micro format cards. The first has a thickness of 0.67 mm, and the second and third have a thickness of 0.76 mm. This problem can be solved using a regular nail file or sandpaper. After trimming, slightly sharpen the SIM card along the contour and along the plane so that it fits freely in the device slot.

An old-style card for a nano-SIM card

Old SIM cards have a large chip size, exceeding the nano-standard size. But you can also cut off an old SIM card. Removing the edge of such a chip does not disrupt the operation of the contacts.

It is easier to cut out a nano-shape from a mini-SIM card, since there is a place that allows you to hold the card while manipulating with scissors. Using a utility knife will make the task much easier.

Step by step steps:

• Use a pen or thin marker to mark the new dimensions on the chip side so that you can see if the lines overlap the contacts;
• cut off the excess plastic, clamp the card itself with tongs for more precise manipulations;
• sharpen the card with a file along the contour to remove nicks, and sand the surface of the plastic on the side of the operator’s logo to make the card thinner;
• insert the SIM into the card holder; if it does not fit, repeat the previous operation until it fits completely into the slot.

If you still have unnecessary SIM cards, practice using them. The chance of the correct result of the pruning procedure will increase significantly.

An alternative to converting a card into a nanostandard yourself:

• contacting the salon cellular communications, where the SIM will be cut to the required size using a special cutter;
• contacting the official office of the operator to replace the SIM card with the required form.

Nano SIM card template

A more accurate way to trim the card correctly is to use a template. It can be downloaded here. When printing the template, set the scale to 100% for A4 sheet.

• Print out the stencil. No color printing required.
• Cut out the nano size template.
• Using glue, or better yet double-sided tape, attach the template to the SIM card from the operator logo side.
• Carefully cut the plastic with scissors or sharp tweezers.

If you don’t have a printer at hand, you can draw the future size directly on the card using a ruler and pencil.

How to do it:

• position the SIM card so that the cut corner is in the lower right corner;
• draw a vertical line along the left edge of the chip;
• measure 13 mm from the left edge of the chip and draw another vertical line;
• draw a horizontal line along the top edge of the chip;
• set aside 9.5 mm from the top edge of the chip and draw a line.

The resulting rectangle will be new SIM size. All that remains is to cut down a small corner.

Popular devices with nano-SIM cards

The table contains a list of the most popular smartphones, working with nano-SIM. Check out the list to see if you have decided to purchase one of these models. Then the service for cutting the card or replacing it from the operator to new standard will be relevant for you.

Cut SIM card for iPhone 5s , as for any other model, you can do it at any mobile phone store, right where you buy your smartphone. This service is provided on a paid basis. You can also get a nano-SIM at your operator's service point, the service is free.

IN modern smartphones Recently, a new standard for SIM card format has begun to be used - nano sim. The most famous representatives that support just such SIM cards are new models Apple iPhone And Samsung phones. Due to this circumstance, many subscribers needed to cut a regular SIM card to the size of a nano SIM, since it is simply not possible to insert a standard SIM card into modern phones.

How to cut a SIM card for a nano-SIM?

You can reduce your SIM card to nano size either on your own or by entrusting the work to specialists. If you decide to cut a SIM card at home, prepare the following materials that will be useful in the process:

• A utility knife or sharp scissors.
• Pen or pencil.
• Caliper or ruler.
• Sandpaper or nail file.

In order to cut a nano sim from a regular SIM card, you should follow the given procedure:

1. Using a pen or pencil, draw the dimensions of the future SIM onto the surface of the old SIM card. The required dimensions of a nano SIM card are 12.3 by 8.8 millimeters. It is necessary to apply the markings as accurately as possible - a caliper and a ruler with a fine scale can help with this. You can also print it on paper and transfer it to a regular SIM card.
2. Using a utility knife or scissors, cut off any excess pieces of plastic, being careful to do the job as carefully as possible without touching the electronic chip.
3. Take sandpaper, trim the edges and grind off the plastic layer on the top side of the SIM card. The required thickness is 0.67 millimeters. Under no circumstances should you try to sand the chip - this will inevitably lead to its malfunction.

Before cutting a SIM card to nano sim size, you should remember that at home you can damage the SIM card and render it inoperable. In this case, the SIM card cannot be restored - you will have to purchase a new one. To reduce the risks, we recommend that you first practice on an old, unnecessary SIM card and only make sure that you can cut off your current one.

Alternative ways to cut a SIM card

It is not necessary to cut the SIM card manually yourself; you can replace it with a card of the desired size or cut it from a regular SIM card using a special cutter. This tool is a kind of hole punch or stapler in which a regular SIM card is placed and in one click it is carefully cut into a micro or nano SIM. Similar tools are available in cellular communication stores, one of which you can contact to replace your SIM card with a nano-sized card. You can also replace the card without cutting it - you need to fill out an application at your operator's service center and receive a new set with a SIM card of the size you need.

Insert nano sim into a phone with a sim card slot standard size This is only possible using a special adapter for nano SIM cards. You need to place the nano SIM card in the adapter, which in turn is inserted into the socket mobile phone. It costs a penny, but the benefits are very noticeable - you don’t need to change the SIM card again in the future if you want to use it in a phone that supports a different format.

iPhone 4 brought in addition to a large quantity technical innovations also physical - microSIM cards from cellular operators. Despite the fact that most operators can already change your old SIM card to a new microSIM, many, not wanting to go to the nearest store, dare to cut the card themselves.

I suggest you consider and evaluate everything possible solutions Transformation of a regular SIM card into a microSIM.

There are three options to solve this little problem:

1. Take your regular SIM to any Apple store and ask for a fee to cut off the excess parts of the old card.

• the card will be made very carefully;
• minimal time spent on manufacturing;
• additional waste of money.

• the card will not require additional processing;
• the procedure will take 30 seconds of your time;
• you will have to run a lot to find this device;
• additional expenses.

1. Take your regular SIM card.
2. Standard sizes in Europe are 25x15 mm. We need to reduce them to 15x12mm. First, measure carefully with a ruler and draw the outlines on a regular map.
3. Using sharp scissors, cut off the “extra” parts of the SIM card, leaving the “working” chip.
4. At the end, you need to retreat 2.5 mm in the right corner of the “micro SIM” and cut the edge at an angle of 45°. Congratulations, that's all. You saved money and had a unique experience free time. The microSIM card is ready for use.

• saving money;
• interesting way to spend your free time;
• handmade.

P.S.: there are times when there is no need to use microSIM. Don't rush to get upset. Today there are already devices like an adapter from MicroSD to SDHC. Also, you can always update the SIM card in the operator’s salon, saving the number.

With the advent of iPhone 5, there was a need for nanoSIM. In fact, this is the same microSIM, only even smaller. 12x9mm is the exact size of the smallest version of the SIM card - iPhone 5 only uses the "working" part of the SIM. In other words, to get a nanoSIM you need to cut a regular or "microSIM" to 12x9 mm, without damaging the chip if possible. There shouldn’t be any particular difficulties with this procedure, so stop reading this text and feel free to get to work.

Although no, take your time and carefully watch the video below. Everything is shown there in detail and clearly. Good luck to you!

If you have not found an answer to your question or something did not work out for you, and there is no suitable solution in the comments below, ask a question through our