Reset and Adjust Screen Resolution Solved! "Failed to save printer settings" errors and solutions Extend these screens could not be saved

Owners of a personal computer, or even several, often face such a problem when they cannot save the parameters of their own printer. In this case, errors that are not clear to the user are displayed, such as 0x000006d9 or 0x00000842.

Windows XP often writes that it was unable to save the printer in the event that local networks are created for several personal computers that are connected by one printer.

However, after an attempt to share access to the printer to other members of the local network, a number of errors begin to arise due to the fact that its parameters cannot be saved.

What will be discussed:

Failed to save printer settings error 0x000006d9

In the event that it was not possible to save the printer settings and the error 0x000006d9 is displayed, then this most often happens due to the fact that Windows XP is disabled. In order for the error 0x000006d9 to disappear forever, you should perform the following chain of operations:

  • press "Start";
  • find "Control Panel";
  • find "Windows XP Firewall";
  • in the event that the browser is not branded, then you should disable or temporarily remove the antivirus, and then install a printer on the local system.

It is worth noting that the reason that the user was unable to save the printer settings may also be that the browser itself is disabled in full or in part. In order to correct the situation, it is worth adjusting the parameters by pressing the "Use recommended parameters" button.

If the firewall is disabled, then it should be enabled, thereby eliminating the error 0x000006d9.

What to do when error 0x00000842 appears

Error 0x00000842

In the event that you have been done through the above steps, and you still could not save the parameters of the shared printer due to error 0x00000842, then you should check the system for viruses or check if the antivirus is working correctly.

In the event that error 0x00000842 persists, you can resort to drastic measures by disabling or rewriting your antivirus or firewall.

Problems saving printer settings error 0x00000001

Error 0x00000001

Error type 0x00000001 can be related to the drivers tcpip.sys and ntoskrnl.exe, win32k.sys and psi.sys, raspppoe.sys and ndis.sys.

In this case, the display of error 0x00000001 with the use of a blue screen will disappear if:

  • the OS should be updated;
  • You can solve problems in the file of the system type Win32k.sys again by updating the Windows XP operating system.

Failed to save printer settings 0x0000070c

In the event that the user was unable to save the printer settings due to error 0x0000070c, it is worth dealing with Windows 7. It is worth clarifying that an error like 0x0000070c most often occurs on the 64-bit version.

At the same time, if it was not possible to save the HP printer settings due to system error 0x0000070c, then you need to check the installation of drivers for the 64 and 32-bit versions. If an inadequate driver is installed spool \ drivers \ w32x64 \ 3, then the file path should be set manually.

You can try to fix the 0x0000070c problem using the registry by following the simple instructions and restarting the print manager.

How to connect laptop to TV via HDMI? I have an inexpensive Samsung LCD TV with two HDMI inputs, and I also have a laptop that has an HDMI output. Will I be able without much knowledge connect laptop to TV via HDMI cable(which came with the TV) and use your TV as a monitor. The fact is that I have an anniversary soon, relatives and friends will come. All my family photos and home videos are on the laptop. I would like to show all this to the guests on the TV, and not huddle around a laptop, we have it small, 15 inches diagonal. And a lot of guests will come, what you will see there, on a laptop. And my daughter watches cartoons on her laptop, although it's more convenient to watch them on TV. Anton.

How to connect laptop to TV via HDMI

Friends, I assure you, nothing is easier. Almost all of us have TVs and laptops, which we do not fully utilize. Every modern laptop and every modern video card has an HDMI output, which was invented in order to transmit high-definition digital video data and multichannel audio without losing quality. Transfer to where? For example, on a modern TV that supports the HDMI standard! This means that using an HDMI interface cable, we can connect a TV and a laptop. The image on the laptop will also be displayed on the TV. The picture on the TV will be as clear and beautiful as on the laptop, and the sound will be multichannel and rich. That is, there will be no distortion of video data and sound.

  • By the way, we have more articles on this topic:
  • ... Or how to watch a video on a laptop on a TV
  • , in it you will learn what to do if after such a connection there will be no sound or image on the TV, or the wrong screen resolution is set!

Now I will tell you an interesting story. Quite recently, a friend of mine called me and his wife to his birthday party. He is an interesting person, he is engaged in tourism, travels a lot and goes on business trips abroad, he has a lot of interesting photos. A lot of relatives and his friends gathered for the holiday he organized. Many have come from far away and have not seen my friend for many years.

At some point during the celebration, all the guests decided to look at a huge collection of photos and videos of my friend on their laptop. It used to be that we looked at all the photos in dusty albums, but now we are making progress, we use a computer for these purposes. So, at some point, I realized that twenty people around the laptop just, well, they just can't fit, and everyone wanted to see the photo collection. And then I examined the TV in the big room. The TV set was not particularly new, Samsung 4 series (type LED), it had two HDMI inputs, which is what you need, and on the laptop, as it should be, there was one HDMI output. It was possible to connect a laptop to a TV via an HDMI cable, which I found in the box from the TV, my friend did not take this box to the trash just because the warranty on the TV did not end - three years.

If you have a Samsung TV, then the original HDMI cable must come with it, take care of it, what is sold in stores, sometimes not of the best quality.
So let's go. We connect the laptop and TV with an HDMI cable. The laptop and TV must be turned off. There are two HDMI connectors on the back of the TV,

We take the HDMI cable

And we connect it, for example, to the HDMI 2 connector,

Connect the other end of the cable to the laptop's HDMI connector.

We turn on the laptop and the TV, the operating system starts, but nothing on the TV. Only the message "Weak signal or no signal",

the guests are waiting tensely and think: “Well, they didn’t let the laptop see the pictures and it won’t work on the TV”.
On Samsung TVs, to display a list of all available video sources, press the Source button on the remote.

Very often users are faced with a situation where the monitor displays a "save mode", "out of range" or "unsupported resolution" message, or « » .
This means that the video card settings are set to a resolution that the monitor does not support.

On many forums and sites, you can find this advice:

"To change the screen resolution, you need to press F8 when loading Windows and set any minimum resolution, after which it will reboot in normal mode and enjoy life."

But, as practice shows, this does not always work.

I want to share 100% way to reset screen resolution on computer.
In order to reset the screen resolution, you really need to boot your computer in Safe Mode, but let's step by step.

  1. When loading Windows, press F8;
  2. We select the item "boot the computer in Safe Mode";
  3. Press the key combination Windows + Pause (we get to the properties of my computer), go to the Hardware tab, press the Device Manager button;
  4. Expand the Video adapters list;
  5. We select your video adapter, call the context menu and select Disable (Windows may ask “Do I need to remove the drivers?” You can answer “no”, but sometimes it is necessary);
  6. We reboot the computer in normal mode;
  7. And now you don't need to do anything, we observe a miracle, Windows will re-detect the video adapter and reset the monitor screen resolution.

This method helped out many times.

There is another way to reset the screen resolution - return the old monitor back or reinstall Windows :) And why are you laughing, I have come across advice on reinstalling Windows on many forums! Just imagine, a 5-minute problem can be solved in a few hours.

How to boot Windows 10 in Safe Mode to reset graphics card settings

In the comments they asked a question (stated): " in windows 10 it is impossible to boot in safe mode without first enabling this option in the OS itself , and since it is impossible to enable this option without a working monitor, your advice for Win 10 users is not relevant. Any other thoughts that would work for Win 10?

PS: there is no other monitor at hand, no built-in video adapter. "

This is not entirely true ... Yes, you can really enable the boot menu only from the "working" Windows 10. But the boot menu, where the "Boot in Safe Mode" (Safe Mode) will be, can be called up by restarting the computer several times with the Reset button on the system unit. Windows 10 will understand that for some reason it cannot boot and will offer various options for recovery. Once booted into Safe Mode, you will be able to perform all the necessary steps to reset the screen resolution in Windows 10, which are described above.

FAQ

Q: how to reset screen resolution via bios

A: information about the screen resolution settings is stored in the operating system configs, you cannot reset the screen resolution through the BIOS

2021 wisemotors.ru. How it works. Iron. Mining. Cryptocurrency.