The home button works every once in a while. iPhone Home button doesn't work. Video instructions for adjusting the position of the connector

One of the common problems that happens with iPhone and iPad is that the home button does not work on the iPhone 4/4s/5/5s/5c/6/6s/SE/7/7 Plus or the home button does not respond to pressing and presses itself. And today we will find out why the home button on the iPhone does not work, what to do if the Home button on the iPhone or iPad does not respond to pressing, and how to restart the iPhone if the home button is not pressed well.

Why doesn't the home button work on iPhone?

In addition to updating to iOS 12, if we talk about the reasons why the Home button in iOS devices fails or works with some lag (sticks), we can distinguish 3 reasons:
1. Software glitches
2. Mechanical damage.
3. When the Home button gets stuck, clicks, sticks, doesn't work well, or doesn't work at all.

How to restart an iPhone if the Home button is hard to press

It will help you fix the problem with the Home button with one click for free. Entering and exiting recovery mode may reboot your device and reactivate the Home button. Follow these steps:

Step 1. Download and launch Tenorshare ReiBoot on your computer (Windows or Mac), and connect your smartphone to the computer.

Step 2. Click “Enter Recovery Mode” and enter the device into recovery mode, a lanyard and the iTunes icon will appear on the screen.

Step 3. After that, click on the “Exit Recovery Mode” button and the iPhone will reboot and the Home button will start working.

Moreover, the program is capable of recovering from any hangup, such as hangs, hangs, hangs, freezes, etc. The utility will allow you to solve most errors in the system without losing data.

The home button on the iPhone does not work, how to display it on the screen

There are still several ways for problems to arise here. You just need to press the buttons with your own hands without having to reboot the device.

Calibrating the Home Button

If the button becomes less responsive, try simply calibrating it.
1. You need to open any application, such as weather, calendar, or stocks, and hold down the power button of your device until the “shutdown” bar appears.
2. Then press the Home button until the previously appeared “shutdown” bar disappears. After the manipulations, everything should work as before.

Standard 30-pin cable

Place the USB cable plug into the iPhone or iPad connector;
Place your finger under the plug located in the connector;
Gently press the connector with your finger in the “Bottom-Up” direction and press the Home button.

Other ways to repair the Home button

If the previous methods did not help, you will have to contact a service center to replace the button and cable with new ones, after which the Home button starts working like new.

Why doesn't the home button work on iPhone?

How to restart an iPhone if the Home button is hard to press

Tenorshare ReiBoot will help you fix the Home button problem with just one click for free. Entering and exiting recovery mode may reboot your device and reactivate the Home button. Follow these steps:

Step 1. Download and launch Tenorshare ReiBoot on your computer (Windows or Mac), and connect your smartphone to the computer.

Step 2. Click “Enter Recovery Mode” and enter the device into recovery mode, a lanyard and the iTunes icon will appear on the screen.

Step 3. After that, click on the “Exit Recovery Mode” button and the iPhone will reboot and the Home button will start working.

Moreover, the program is able to recover from any freeze, for example, freezes on the apple logo, freezes in recovery mode, freezes when updating the firmware, freezes on a call, reboots cyclically, black and blue screens, etc. The utility will allow you to solve most errors in the system without losing data.

The home button on the iPhone does not work, how to display it on the screen

There are still several ways for problems to arise here. You just need to press the buttons with your own hands without having to reboot the device.

Calibrating the Home Button

Standard 30-pin cable

Place the USB cable plug into the iPhone or iPad connector;
Place your finger under the plug located in the connector;
Gently press the connector with your finger in the “Bottom-Up” direction and press the Home button.

Other ways to repair the Home button

If the previous methods did not help, you will have to contact a service center to replace the button and cable with new ones, after which the Home button starts working like new.

Products Apple It is characterized by a high degree of reliability and breaks down less often compared to products of other brands. However, even iPhone latest models sometimes have to be sent in for repairs. Often the reason for contacting the service is the failure of the mechanical part of the smartphone. In this case, its owner often has a question; “What to do if the Home button does not work on iPhone 6?” Our service center specialists will help you answer this question. problem solvers With mobile devices Apple quickly and at an affordable price.

Signs of breakdown

The main signs that the Home button is not working correctly and will need to be repaired or replaced are:

Stop responding to clicks;
When used, an iPhone part crunches or makes other sounds that are uncharacteristic for it;
Changing the mobility of a button that is wobbly or, conversely, has sunk into the body.

Checking the button

Sometimes the malfunction is almost invisible. And in order to make sure that it is necessary urgent repairs Home button on iPhone 6 and 6 Plus, it is recommended to perform a simple functionality test. To do this, just press Home about 10 times. Even one or two lack of response from the smartphone to a press out of ten indicates a problem. Moreover, sometimes the button not only does not work, but also cracks and clicks unusually.

Causes of malfunction

The main reasons for the breakdown of one of the most important iPhone elements some:

mechanical damage due to falls or impacts;
liquid entering the leaking housing;
software glitches;
contamination of the mechanism;
failure of such parts as a button cable or smartphone motherboard or defective soldering of contacts, which is a manufacturing defect.

The button, made of plastic, is quite fragile and does not withstand being dropped from a height or contact with sharp surfaces. Because of this, its surface may crack and play may begin. The same cause of malfunction is also characterized by periodic lack of response.

If moisture gets inside as a result of contact with the device with wet hands, getting wet in the rain or falling into water, the button practically stops pressing and creaks a lot. The cause of the malfunction most often lies in oxidized contacts. But, if there was a lot of liquid, damage to the entire iPhone is possible, and in this case, most likely, not only the Home button will need to be replaced and repaired.

The software causes a malfunction in cases where third-party applications were installed on the smartphone or when a new one was installed. operating system and programs were carried out by a non-specialist. And Home pollution can be caused by improper operation of the device. For example, being in a dusty atmosphere or dirty hands of the user.

Repair features

A problem with software is one of the most simple options Home faults. To fix it, you don’t even have to disassemble the iPhone - regular calibration and, possibly, reinstalling the operating system will be enough. Whereas replacing a button, cable, replacing a loose connector and, moreover, problems with motherboard, takes more time, so it will cost more.

Replacing the cable and board

In order to replace a worn-out Home cable on iPhone 6 and 6 Plus, you will have to perform the following steps:

Prepare the necessary tools: tweezers, a suction cup and a star screwdriver;
Remove the SIM card and unscrew the fasteners at the end of the smartphone;
Use a suction cup to lift the screen and remove the display module;
Open the device and unscrew the screws on the connector plate;
Disconnect all cables and remove the housing;
First remove the screws securing the Home button, and then the protective plate;
Disconnect the cable.

The replacement work will consist of almost the same stages, except for the last two motherboard. At the same time, it is determined that the cause of the malfunction of the Home buttons is precisely this, only the service center specialists. It is impossible to do this yourself, as well as to replace the board, without either experience or the appropriate tools.

Cleaning and lubricating the mechanism

If the Home button becomes dirty as a result of misuse or excessive use, it can be cleaned and lubricated using regular alcohol and WD-40 aerosol. The latter is used for lubrication in industrial production, the weapons and aviation industries, and in everyday life it is used to lubricate locks and doors. WD-40 will also help repair your iPhone. To do this, you will need to apply the product to the iPhone button and press several times so that the lubricant penetrates into the gap. It is not recommended to use a lot of the drug, which can get between the sensor and the glass of the device, causing greasy stains to appear.

Cleaning the contact pad, after which the button in most cases does not crunch and responds normally to user actions, is carried out as follows:

A small amount of alcohol is applied to the Home surface;
The button is pressed several times;
After 2–3 minutes, after the alcohol has dried, the functionality of the device is checked.

Replacing the Home button

A completely broken iPhone button, with visible defects on the surface and the inability to press as a result of water getting inside, requires replacement. In this case, Home can be restored, but the functionality of the fingerprint sensor will most likely be lost, and an error will be displayed when trying to update. In order to avoid a new problem after fixing the old one, replacing the Home button on the iPhone 6 should only be carried out by a certified service center

Where can I get my iPhone repaired?

Even considering the relative simplicity of the design of the iPhone 6 and 6 Plus, if a mechanical button breaks, you should not try to fix the problem yourself. Each stage of disassembling and cleaning smartphones, repairing and replacing their parts requires maximum care. Incorrect actions can lead to the final loss of functionality not only of the button, but of the entire device.

Thanks to our many years of experience, the use of equipment necessary for repairs and the availability original spare parts For Apple smartphones, our technicians will clean and replace the button and other parts, while maintaining the ability to use the fingerprint sensor. At the same time, the quality of work is ensured by a company guarantee, and the repaired iPhone will serve its owner for many years.

After years of using your iPhone, the Home button can become annoying. Not for everyone, of course, but such cases cannot be called isolated either.

Right after iphone shopping 5s, iphone 7, iphone 6, iphone 5, iphone 6s, iphone 5c, iphone 4, iphone 7 plus, iphone 6 plus, iphone 4s, iphone 4, iphone x work great.

The problem starts over time. After long-term use of an iPhone 5s, iPhone 5, iPhone 6, iPhone 5s, iPhone 4, iPhone 4s, iPhone 7... the Home button sometimes does not work well - after one time or less it stops responding to your commands.

Over time, you will have to press it several times to get the device to respond at all.

This is one of the main disadvantages of devices, which is a decrease in sensitivity to pressing the Home button.

The problem lies in the technical equipment and the only solution is often to improve the corresponding contacts, but recently the solution to calibrate the home button has become popular, which improves its performance.

Personally, I don’t believe in the effectiveness of calibration, but nothing prevents you from applying this process - instructions below.

iPhone home button doesn't work - calibrate it

To successfully calibrate the Home button, run any system application, for example, Weather.

Hold the Power button until a bar appears at the top with the information "Disable". Then press and hold the Home button until open application will not close and you will be transferred to SpringBoard

The home button on your iPhone doesn't work - use an alternative one

What to do if calibration did not bring any improvement and you want to take responsibility for repairing it yourself.

Then you can display the virtual home button. To use this option, you must enable one of the available functions, built into iOS.

It's called AssistiveTouch. To do this, go to Settings > General > Accessibility > AssistiveTouch.

Once this feature is activated, a translucent button will appear on the screen. If its location does not suit you or obscures another element below it, you can drag it to another location on the screen.

Pressing the button brings up a menu where there is a virtual home button. Clicking on it will work like clicking on a physical one.

In addition, AssistiveTouch performs more tasks. The menu has additional buttons: “Siri”, “Notification Center” and “Control Center”, “Favorites” and others.

Clicking on "Devices" will give you access to the following options: lock or rotate the screen, turn off the device, adjust volume and mute.

You will also find the “Program Switching” and “Screen Capture” functions. The purpose of introducing AssistiveTouch was to make it easier using iPhone, for people who have difficulty touching the screen or pressing physical buttons, particularly Home.

Therefore, some of the available functions from the menu allow you to replace them or enter your own algorithm.

Even in Apple devices What happens is that something stops working normally, often this is reflected in physical buttons.

Thanks to the AssistiveTouch function, you can partially solve the issue in case of problems with the home button.

The home button on the iPhone doesn’t work—correct the position of the connector

Owners of iPhone 4 and 4S sometimes encounter a situation where the home button does not respond to touches at all.

If this also affects your smartphone, then try the trick with a 30-pin standard connector.

To do this, connect a USB cable to your iPhone. Then place your finger under the plug inserted into the connector, slowly press the plug “Bottom-Up” and press the Home button.

If the button does not start working, then do not try to press harder - a little effort is enough.

The home button on your iPhone doesn’t work – clean and lubricate the mechanism

If the Home button is not working, you can try cleaning and lubricating it. To do this, you can use alcohol and WD-40.

To do this, with your smartphone turned off, apply a little product to the home button and press it several times until the liquid penetrates into the gaps.

Be careful, WD-40 is highly fluid and will easily penetrate even the tiniest of places.

Wait a few minutes and you can check. For some, such actions helped return the Home button to functionality.

Only if you have mechanical damage to your face, then none of the options described above will work - you don’t even have to try.

If you're a little into electronics, you can just buy new button with a cable for your iPhone and replace it yourself. Good luck.

iPhones purchased more than 200 days ago begin to jam at some point Home button. Not all devices, of course, but mine was unlucky. Either the fat on the contacts prevented the conduction of current, or the former moisture inside the case was to blame for the lack of signs of life, but the most important button of the phone stopped responding to pressing.

She can be brought back to life. Liquid will help us with this WD-40, sold at any hardware store.

WD-40- American company and trademark a famous aerosol drug developed by Norman Larsen in 1953 for the Rocket Chemical Company, San Diego, California. The drug was originally developed for industrial users as water-repellent agent that prevents corrosion. It was later found that it also has many possibilities for domestic use.

The exact formula of the product is still a trade secret and is carefully guarded. The product is not patented to avoid disclosing the manufacturing technology.
– Wikipedia

So, we take the iPhone, spray a stream of WD-40 on the Home button, press it several times through a napkin, then spray it and press it again. After two minutes the button comes to life. Specially filmed video Below, the advice itself was found on a life hacker.

What to remember:
1. Do not let WD-40 come into contact with the mucous membrane;

2. Make sure that you understand the risks, because there are different opinions on the Internet about how WD-40 acts on electronics. Some say it's no big deal. Opponents urge in every possible way against spraying liquid onto any circuits, because the “vedeshka” attracts moisture from the atmosphere and contributes to even greater oxidation contacts.

3. Wipe the phone well with a damp cloth to remove any oily WD-40 residue.

I had no other choice, because it was already evening, to go to service center far away, but I need a work phone now. Time will tell who is right. In two weeks I will post how my phone works.

Thanks for the tip, ToyoDjUa.

1. Launch any native application on the iPhone: notepad, weather, safari.
2. Clamp Power button so that a red stripe appears on top Slide to Power Off.
3. Release Power, press and hold Home until the bar disappears and the application closes.

Update 03/19/2012 The button works.

Update 05/09/2012 The button works.

Update 07/05/2012 The button works.

website For iPhones purchased more than 200 days ago, the Home button begins to jam at some point. Not all devices, of course, but mine was unlucky. Either the fat on the contacts prevented the conduction of current, or the former moisture inside the case was to blame for the lack of signs of life, but the most important button of the phone stopped responding to pressing. It can be returned...