Installing official firmware on Samsung Galaxy J2. Installing official firmware on Samsung Galaxy J2 Installing custom firmware on Samsung Galaxy J2 Prime SM-G532

Instructions for flashing the Samsung Galaxy J2 Prime SM-G532 smartphone and installing custom recovery, obtaining root rights. Or just how to reflash Samsung J2 Prime?

If suddenly you do not like the software of your Samsung Galaxy J2 Prime SM-G532 smartphone, using these instructions you can change the official version of Android to a more recent one or install a completely custom firmware, which will expand the functionality of the device and increase the speed of the robot. After receiving root, you can free your mobile from a large number of unwanted applications and thereby increase the amount of memory on your phone. Below in the instructions you can download the firmware for the Samsung Galaxy J2 Prime SM-G532 phone.

Flashing custom recovery or unofficial firmware will trigger the Knox counter and consequently void the warranty on your smartphone. Therefore, first think about whether you need it.

Installing the official firmware on the Samsung Galaxy J2 Prime SM-G532 smartphone using the Samsung Odin service program. In order to install new firmware on your smartphone, you first need to download several files to your PC:

Download the latest Official firmware for Samsung Galaxy J2 prime SM-G532f, selects the firmware for the region you need from the archive.

Before flashing the phone, you first need to decrypt it; if this is not done, after flashing the firmware you will get a beautiful metal “brick”.
To remove the lock from the Samsung Galaxy J2 Prime SM-G532, you need to disable the reactivation lock. Go to “Settings” - “Lock screen and protection” - “Find phone” and disable “Activation Lock.” Before and after the firmware update procedure, you need to do a general reset of the device to factory settings to avoid all sorts of errors and interface slowdowns.
When performing this procedure, all your data and files will be permanently deleted.

Option 1: On the device, open “Settings” “Backup and reset” “Account” “Reset data” > “RESET DEVICE” and click “Delete everything”
Option 2: Turn off the device, press and hold the “Volume Up”, “Home (Central)” and “Power” buttons and after a few seconds the “Recovery” menu will appear. In the “Recovery” menu, select “Wipe data/factory reset” -> “Yes – delete all user data”, deleting all user data will begin. After the process is completed, select “Reboot system now” and the device will begin to reboot.

You can skip this step, but remember! If you do not reset the data, after the update, “lags” and unstable operation of the device as a whole may appear due to the tails of the previous firmware, and recently, before completely resetting the smartphone, you also need to delete your Google account, otherwise the smartphone may be blocked.

Unpack and install the previously downloaded drivers for Samsung J2 Prime on your PC. Then unpack the archive with Odin and the firmware.
We launch the program for flashing j5 prime Odin as an administrator. To do this, hover over Odin and right-click and select “Run as administrator”, then click “Yes”.

After launching Odin, arrange the firmware files in the following order:
The file BL……….tar.md5 is inserted into the “BL” field
The AP……….tar.md5 file is inserted into the “AP” field
The file CP……….tar.md5 is inserted into the “CP” field
The CSC file……..tar.md5 is inserted into the “CSC” field

We check that the “checkmarks” are only in the “Auto Reboot” and “F. Reset Time"

We put the Samsung Galaxy J2 Prime SM-G532 phone into firmware mode. To do this, turn off the phone and then press and hold the “Volume Down”, “Home” and “Power” buttons and after the menu with a yellow triangle appears, press the “Volume Up” button
We connect the smartphone using the supplied USB cable to the PC and in the Odin program, the inscription “COM” should appear in the upper left corner, highlighted in blue, then press the “Start” button.

Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try other USB ports.

The smartphone firmware process has started. After successful firmware, the device will reboot automatically and the message “Finish” will appear in the Odin program.

Installing custom recovery TWRP Recovery on Samsung Galaxy J2 Prime SM-G532

And so let's start installing custom recovery on Samsung j2 Prime

If you have not yet installed Samsung drivers on your PC, download and install them. Then connect your smartphone to your computer using a standard USB cable. After the PC recognizes the phone, additional drivers and updates will be installed automatically.

We will need the Odin 3 program, download Odin

Turn off your smartphone, and then (with it turned off) press and hold the “Volume Down” + “Power” + home key until the phone boots into Odin mode (Download Mode). You will see a warning, confirm your desire to boot into this mode by pressing the “Volume Up” key.

With your phone in Odin Mode, connect it to your PC using a standard USB cable.

Run the Odin 3 flasher program on your PC as an administrator

In the AP line, indicate the path to the previously downloaded file with custom TWRP recovery J2 Prime TWRP Recovery with the extension “.img.tar” and select it

Uncheck “auto reboot” and press start (the phone should be flashed, the flashing time should not be more than 30 seconds, the result should be like this (succeed 1/ failed 0);

We do not touch the Smartphone until the firmware process is completely completed; usually the firmware lasts no longer than 30 seconds.

Without turning the gadget into working mode, directly from the Download mode we go to the newly installed TWRP Recovery by holding down three buttons (volume up + home + power button, when the Samsung message appears, release the buttons).

All! We rejoice.

Installing custom firmware on Samsung Galaxy J2 Prime SM-G532

To install custom firmware on a Samsung J2 Prime SM-G532 phone, you must have custom recovery TWRP Recovery, if you don’t have it, see the point above.

Download to your PC any custom firmware that you like (for TWRP Recovery in **.zip format), for example:

Then copy the firmware file to the phone's memory. Then turns off the smartphone and boot into custom recovery TWRP Recovery (with the phone turned off, hold down the power buttons + volume up button + HOME)
And through TWRP Recovery install the firmware file:

Go to Wipe and select Advanced Wipe
Check the boxes: “Davlik Cache”, “System, Data”, “Cache”, “Android Secure”.
Doing “Swipe to Wipe”
Go to Install -> Select the memory where the custom firmware is located, and select Swipe to Confim Flash, the installation will begin
After installation in recovery, select the Reboot -system item and the device will begin rebooting.

Ready! You have successfully flashed custom firmware! reboot your smartphone and use it with pleasure (without paying attention to the bugs of the custom firmware)

Getting ROOT on Samsung J2 Prime G532 Marshmallow

Download the SuperSu.zip program and copy the installation file to the phone memory

Switch your smartphone to custom recovery mode (recovery mode), to do this, turn off the device and then hold down the “Volume +” buttons, the “Home” button + the “On” button.

In the TWRP Recovery Mode menu, select Wipe -> Advance Wipe -> and select Cache Data

After removing the garbage, we return to the main TWRP menu, and there we select the Install item, then select the installation file SuperSu.zip in the directory and confirm the desire to install.

After successful installation of the application, the phone reboots. In the program menu you will have

SuperSu App, which actually makes it possible to manage Root superuser rights.

Instructions for installing the official single-file firmware on the Samsung Galaxy J2 (SM-J200x).

Drivers and programs

Attention!

To install the official stock firmware on the Galaxy J2 and return the phone’s status (“Settings” > “About device” > “Properties” > “Device status”) to “Official” after switching from custom firmware and thereby returning the ability to receive updates over the air, just follow the instructions provided.

Installation instructions

Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.

Reset your device.
To do this, go to the settings section " Backup and factory reset", select the item " Reset data» > « Reset the device", enter the PIN code (if one is set) and click on the button " Delete everything" The phone will reboot.

Run Odin PC as administrator.

Put your device into download mode ( Download Mode).
To do this, you need to simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

In this state, connect the smartphone to the computer. In Odin the message “ COM».

Click on the button " AP» and select the TAR firmware archive.

Items " Auto Reboot" And " F.Reset Time"should be activated, A " Re-Partition"if active - must be disabled.

Click on the button " Start" The firmware installation process will begin.

At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be restarted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", and after - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.

Get a new stunning galaxy design for your phone or tablet with Theme for Samsung Galaxy J2! If you like to personalize your Android device, our most popular Launcher theme is definitely for you! Download Theme for Samsung Galaxy J2 for free and change the way you use your phone with a simple Launcher theme inspired by our galaxy.

Our amazing new Launcher theme has amazing graphics, epic packs and beautiful backgrounds. This is a free Launcher for your smartphone or tablet. Enjoy this theme every time you use your phone with this lovely galaxy Launcher Theme!

Change your phone theme to amazing interstellar design and fantastic colors as you can see in the HD screenshots;
Customize application icons and change them all on your phone according to your preferred style;
Great visual effects which you can select and apply to this adventure application;
Change the font and color to match the look of this beautiful launcher theme.

★ How to install this amazing design ★

Download theme for Samsung Galaxy J2;
Open the app and swipe to start activation;
You will receive a notification if you have a compatible app, such as New Launcher 2018, so you apply this theme. If you don't have it, you will be redirected to install it.
After installing a compatible app, you can customize this galaxy launcher theme!

◆ Notice ◆

Since Theme for Samsung Galaxy J2 is an amazing Launcher for Android, we have worked on creating compatibility apps to make it work perfectly. This is a great theme that it works with GO ROYAL EX 2016: New Launcher 2018 Theme. If you don't have a compatible app installed on your device, don't worry! You will receive instructions on how to download it! You can now customize one of the new Launcher themes!

★ Want to get more Android launchers for free? ★

✱ If you want to install any other amazing launcher, you can visit our developer page! We have hundreds of themes for you! Another place where you can get more launcher themes is New Launcher 2018.
✱ Don't forget that if you like this personalization program, please rate and review it !
✱ We have created a theme for Samsung Galaxy J2 to give you a unique customization option for your phone or tablet! With new features theme for Samsung Galaxy J2 will become your favorite Android phone or tablet .

End User License Agreement
Read to know the terms and conditions for downloading, installing, using and accessing the features of this application - https://goo.gl/xUj6gb

Privacy Policy
We do not store personal information. See what data we analyze and how it is used - https://goo.gl/66xfmf

Latest Theme for Samsung Galaxy J2 apk Download.
Get a new amazing galaxy design for your phone or tablet with Theme for Samsung Galaxy J2! If you enjoy personalizing your Android device, our most popular Launcher theme is definitely for you! Download Theme for Samsung Galaxy J2 for free and change the way you use your phone with a simple theme Launcher inspired by our galaxy.

Our awesome new Launcher theme has amazing graphics, epic icon sets and a beautiful background. It"s a free Launcher ideal for your smartphone or tablet. Enjoy this theme every time you use your phone, with this beautiful galaxy theme Launcher! ✱What do you get when you download Theme for Samsung Galaxy J2 ✱

Change the phone theme this amazing interstellar design and fantastic colors as you can see in the HD screenshots;
Customize app icons and change them all on your phone to match your preferred style;
Great visual effects that you can choose from and apply to this epic launcher app;
Change the font and color to match the look of this beautiful launcher theme.

★ How to install this awesome design ★

Download Theme for Samsung Galaxy J2;
Open the app and swipe to begin the activation;
You will get a notification if you have a compatible app, like New Launcher 2018, so you apply use this theme. If you don't have the it, you will be redirected to install it.
After you install the compatible app, you can set up this galaxy launcher theme!

◆ Notice ◆

Since Theme for Samsung Galaxy J2 is an amazing Launcher for Android, we have worked on creating compatibility apps for them to work perfectly. This is a great theme that it works with GO Launcher-Theme, Wallpaper, New Launcher Theme 2018 or New Launcher 2018. If you do not have a compatible app installed on your device, don"t worry! You will get instructions on how to download it! Now you can set up one of the new Launcher theme!

★ Want to get more launchers for android free? ★

✱ If you want to install any other awesome launcher, you can visit our developer page! We have hundreds of themes for you to try! Another place where you can get more launcher themes is New Launcher 2018.
✱ Don’t forget, if you like this personalization launcher, please rate and review it!
✱ We've created Theme for Samsung Galaxy J2 to give you a unique customization option for your phone or tablet! With new features, Theme for Samsung Galaxy J2 will become your favorite Android phone or tablet Launcher theme.

End User License Agreement
Read to find out the conditions for downloading, installing, using and accessing features of this app - https://goo.gl/xUj6gb

Privacy Policy
We do not store personal information. See what data we analyze and how it is used - https://goo.gl/66xfmf Download and install Play Store APK file or download and install obb from GooglePlay AppStore.

Install optional products - DriverDoc (Solvusoft) | | | |

This page contains information about installing the latest Samsung Galaxy J2 driver downloads using the Samsung Driver Update Tool.

Samsung Galaxy J2 drivers are tiny programs that enable your Mobile phone hardware to communicate with your operating system software. Keeping your Samsung Galaxy J2 software updated prevents crashes and maximizes hardware and system performance. Using outdated or corrupt Samsung Galaxy J2 drivers can cause system errors, crashes, and cause your hardware or computer to fail. Moreover, installing the wrong Samsung drivers can make these problems worse.

Advice: If you are not sure how to update Samsung device drivers manually, we recommend downloading the Samsung Galaxy J2 Driver Utility. This tool will automatically download and update the correct versions of Samsung Galaxy J2 drivers, preventing you from installing the wrong Galaxy J2 drivers.

About the author: Jay Geeter ( Jay Geater) is the President and CEO of Solvusoft Corporation, a global software company focused on innovative service programs. He has a lifelong passion for computers and loves everything related to computers, software and new technology.